The gasket for the front timing cover arrived about 12pm so I could crack on with it a bit more.
IMG-20201125-WA0005 by
Luke Ryland -
Flickr2BBcode LITE
Fitted the gasket and then finished doing the cambelt and torqued everything to spec.
IMG-20201125-WA0009 by
Luke Ryland -
Flickr2BBcode LITE
IMG-20201125-WA0011 by
Luke Ryland -
Flickr2BBcode LITE
IMG-20201125-WA0013 by
Luke Ryland -
Flickr2BBcode LITE
IMG-20201125-WA0025 by
Luke Ryland -
Flickr2BBcode LITE
IMG-20201125-WA0015 by
Luke Ryland -
Flickr2BBcode LITE
Used my crank locking tool that my dad made for me, works perfectly.
All back together
IMG-20201125-WA0027 by
Luke Ryland -
Flickr2BBcode LITE
Then I cleaned the exhaust manifold mating faces and bolted it on, then I replaced the turbo oil drain to block seal and fitted the turbo. I then realised the seal was rubbish as the pipe could easily move in and out plus side to side so I now need to get one of them... genuine I think this time!
IMG-20201125-WA0031 by
Luke Ryland -
Flickr2BBcode LITE
IMG-20201125-WA0033 by
Luke Ryland -
Flickr2BBcode LITE
IMG-20201125-WA0036 by
Luke Ryland -
Flickr2BBcode LITE
20201125_155348 by
Luke Ryland -
Flickr2BBcode LITE