Thread: Body/Trim: - Cellulose onto Etch Primer
View Single Post
Old Feb 24th, 2021, 15:29   #6
Bob Meadows
Premier Member
 

Last Online: Today 17:21
Join Date: Sep 2017
Location: STANDISH LANCASHIRE
Default

It is advised to stick with one type of paint:~ if all the base coats are cellulose based then compatibility is fine.
Cellulose is easier to work with particularly if you get runs/orange peel etc.
Although it has become more difficult to obtain it is still available if you shop around.
Two pack isn't for the average DIY man unless you have a very cheap body- one to avoid.
No experience of the water based paints that are used on new cars- Cellulose is fine if you don't chance the mix of base coats and far easier in many respects.
Good luck.
Bob.
Bob Meadows is online now   Reply With Quote
The Following User Says Thank You to Bob Meadows For This Useful Post: