Here a drawing of a NOS one, so in its original shape. The measurements are in mm.
Also an image "splitted it in layers" A B C as I had the idea to take sheets of the right kind of rubber, cut the layerparts out and glue them on each other to get the complete rubber, after gluing grinding the roundings. Printing this in 1:1 should get the real dimensions (black scalebar to check if the print was correct is 100 mm long).
The problem is, that the original rubber is a fairly thight (should withstand some forces) rubber with pores in it (should be able to be pressed in the actual gap between the hatches) but no pores in the surface (shouldn't collect water and dirt in it). I didn't search finding this kind of rubber in the correct thicknesses.
(mirror the images for the one of the other side of the hatch)
I hope the drawings are self-explaining (view from above and cross-section).
|