We also have a nice Adjustable Aluminum Rear Trailing Arms/Panhard Bar Kit... This kit will work with the Swedish Ops Rear End Assemblies, and the factory Later 66 and up Rear Ends with out adapters. We do offer an adapter kit for the earlier cars also, so no one is left behind... With this kit, you can now lower your car, and always be able to dial in your rear ends pinion angle, and side to side position.. If you change your ride postion with the factory arms, the pinion angle will change, and the rear end will move more to one side.
In production at this time, is a nice Rear Coil Over Conversion kit.. This kit eliminates the Rear Coil Spring and shocks, and replaces them with the Adjustable Qa1 Coil Over's.. Unlike other rear coil over kits, ours puts all the weight load back into the factory spring pockets.. Some other kits out there, only offer a cross bar that attaches to the inside wall of your unibody frame work. Never made sense to me, and hated using them on other builds, so I have designed it a bit different.. There is also a quick adjust ride height setting, that will allow you to fine tune your vehicles stance and ride height..
