Quote:
Originally Posted by Derek UK
NB: B18 distributors of the type that have the low tension connection made by an insulated bolt that goes through the distributor body (all B18 AFAIK) require a cap which has a small semi circular cut out to clear this fitting. Adjacent to that is a recess which allows the tab behind the retaining clip to locate the cap correctly i.e. Plug wire one will always be next to the notch in the rim of the distributor body. Therefore the caps for the B18 and B20 are different. The B20 condensor through connection is a much less annoying rubber block.
 |
I'm all confused.....
Derek - which distributor are you saying that requires that semi-circular thingamer?
I have a B18A distributor here at the moment with the insulated bolt that goes through the distributor body, but the B20A cap that I have fits (IE the type with the recess for the tab). There is no semi-circle in the cap and the condenser doesn't get in the way