Quote:
Originally Posted by Ron Kwas
tj;
It is neigh on impossible to thread the wire going down, as it is akin to threading a needle ...in the end of a pipe (that pipe necessary to prevent loosing Steering Box oil), but is not too difficult going up.
Good Hunting!
|
This echoes my experience...
Replaced my Amazon horn wire a few months back - from inside the car down the column? No chance.
From the engine bay upwards: took a couple of attempts but wasn't too difficult. I tried using a thicker bit of cable with the thinner gauge horn wire taped to it, but it struggled to get past all the obstructions in the column tube.
In the end, I just wiggled the cable around fed it through into the car.
Use a really long bit of cable - you don't want to accidentally pull it all the way through and have to start again and it gives you the freedom to get things just right before you cut it and start connecting the cable at either end.