View Single Post
Old Aug 31st, 2017, 21:48   #353
VictorTheV50
New Member
 

Last Online: Feb 4th, 2021 09:35
Join Date: Mar 2017
Location: Larne
Default TCM-0002 Shift signal missing FIXED

TRANSMISSION SERVICE REQUIRED......
Intermittently. Randomly. No set timescale between error codes, CEL's and limp modes....
Heres how i discovered my issue...
Took the TCM off. removed the plug from the box, whilst doing so dropping the horse shoe clip into the sump not realising it was in the inside.
Sump had to come off the gearbox...
In order to get the sump off i had to move couple of pipes from the oil cooler and a loom....
Loom in question was cable tide to the metal frame below the radiator (the one the belly pan screws to). Wires had been rubbing. Got the meter out and belled between pin C1 and the rubbed wire and there it was... a dead short for shift solenoid 1.....

Oil change done in the process.
128K one my D5 v50.
hopefully good for another 128K.
Attached Images
File Type: jpg Loom Rub.jpg (184.6 KB, 46 views)
VictorTheV50 is offline   Reply With Quote
The Following 4 Users Say Thank You to VictorTheV50 For This Useful Post: