View Single Post
Old Jul 20th, 2002, 21:00   #3
romar
Guest
 

Location:
Default RE: 740 fault code 2-3-2

Peter, Thanks for your help. I tested the fuel presure and injectors but no luck. Your advice set me thinking so I performed a functional test and got a code 3-3-3 instead of 3-3-2 when dropping back from full throttle open. Assuming that this had to be some sort of problem indicator I pulled down the idle switch cleaned it and the multiplug up with WD40, put it back and re-set, Bingo the revs are back where they should be.(On the other hand it could have been down to the shouting and swearing) Again many thanks for your reply

Regards Romar
  Reply With Quote