View Single Post
Old Feb 14th, 2020, 21:47   #1
Black dog
Senior Member
 

Last Online: Apr 22nd, 2024 21:32
Join Date: Jul 2016
Location: Derry
Default V70 d3 map sensors

I'm finally getting around to troubleshooting a boost issue on the v70. It's had a boost issue since I got it.
It is lumpy to drive no power down low and then the boost comes in all of a sudden around 1800 rpm. It then pulls all over the road with torque steer. It feels and sounds to over boost then, there is a slight wine from the turbo like its under far too much pressure.
It's got fault codes p003a85 and p029900
It's been smoke tested for leaks and has none. I'm certain it's over boosting although reporting under. I've read identical problems on the v60 threads but no conclusions.
I suspect faulty map sensor. Everyone suggests the sensor on the intercooler but the only map sensor I can see is on the intake manifold. Can anyone confirm it has more than one map sensor.
__________________
If I've offended you, good! That was my intention
Black dog is offline   Reply With Quote