Quote:
Originally Posted by emy
I had it cracked due to the age of it, if is the same in your case. Usually I check the engine every two/three days, so no much dirt of oil, I noticed the cause and located it easily. I tried to tape it, using pipe tape, also put some kind of glue and wrapped it, did not last, the pressure was too high and failed again. I bought one from Amazon for £16. I removed the top plastic part and replaced it in one piece. It was not easy job, removal of bumper is a must. Its been six months since, no problems with the replaced one.
https://www.amazon.co.uk/gp/product/...?ie=UTF8&psc=1
I would get the sorter version of the hose, removing the top plastic part is very, very difficult. I end up removing in pieces.
|
Thanks for this!!
Is this hose the drivers side intake hose? (Cold side of the inter cooler) going up to the MAP sensor?
That’s the one I have a hole in, found it yesterday and used some heavy duty self bonding tape for the mean time. If this part is the right one I’ll go ahead and order it!