Quote:
Originally Posted by Laird Scooby
If you get your head in the drivers footwell with a torch and look on the bulkhead above the accelerator pedal, you'll see a 4-way grommet - throttle and bonnet release cables go through it leaving a couple of spares, perfect for the changeover switch/gauge cable.
Nice, neat looking job under the bonnet too!  |
Thanks for the heads up on that!! I didn't really have time to find a good way through last night but I knew the main loom goes through somewhere there so I'll look for that grommet!! Any ideas if you can get replacement switch blanks, if you remember I had that red light on one, well that's cracked and I was going to put the change over switch there.
Yea it came out rather neat thanks to the cable ties fitted along the scuttle panel there, meant all the wires could be stored together, was a bit of a mess on my V40 as you get a lot of excess wiring.