I am not 100% certain on your model, but on mine the top mount and top mount bearing were separate.
Depending what shocks you use (I used Bilsten B4’s) you will also need bump stops and bellows, as you will not be able to use the existing ones as you are building prior to removing the old ones. Also I don’t think there is s rubber spring seat, unless you mean the rubber at the top which is the top mount bearing.
So the list is:
Shocks
Springs
Top mounts
Top mount bearings
Bump stops
Bellows
Drop links
And if you decide I would seriously suggest wheel bearings
__________________
Current: 2015 S80 SE Lux D4
Previous: 2010 C70 2.0 SE Lux, 2004 V40 2.0 Sport Classic
Founder member of the X40 In Dash Cup Holder Owners Club 😋
|