|
XC90 '02–'15 General Forum for the P2-platform XC90 model |
Information |
|
XC90 MisfireViews : 1723 Replies : 22Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Jun 2nd, 2024, 21:21 | #21 |
Member
Last Online: Jun 5th, 2024 23:00
Join Date: Jan 2013
Location: London
|
More photos - Vida instructions for re-install oil pump - not sure what I'm supposed to measure looks like gear play but I'm sure it's tension of the drive gear against the main gear on the crank. Stat says "Flank Play" is that lateral movement or radial movement?
Last edited by seandodwell; Jun 2nd, 2024 at 21:28. |
Jun 2nd, 2024, 21:48 | #22 |
Member
Last Online: Jun 2nd, 2024 21:48
Join Date: Jul 2022
Location: London
|
I'd chuck another set of shells in as a matter of course as long as the journal looks okay. If you change the rings you need to deglaze the bores or you might end up with low compression/high oil consumption as the rings and bores will glaze rather than bed in, don't be afraid to rev the engine when you start driving again, plenty of revs on light throttle openings to get the rings bedded.
|
Jun 5th, 2024, 23:00 | #23 |
Member
Last Online: Jun 5th, 2024 23:00
Join Date: Jan 2013
Location: London
|
Thx Volvocano!, I have honing stones at ready. just still trying to find alternates to Volvo expensive rings sets, Also would still like some help on the oil pump removal, has anyone done this and reinstalled it otherwise piston 6 is staying in!! Head should be back next week, machine shop are just awaiting a new valve from Volvo Sweden! While I'm on does anyone know a decent alternate to Berryman's Carb cleaner for cleaning off the pistons.?? Or a UK supplier with stock??
|
Tags |
3.2, misfire, se sport |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|