|
S80 '06-'16 / V70 & XC70 '07-'16 General Forum for the P3-platform S80 and 70-series models |
Information |
|
BCM electronic parking brake 2008 S80Views : 589 Replies : 3Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Nov 12th, 2022, 00:00 | #1 |
Junior Member
Last Online: Sep 11th, 2023 15:06
Join Date: Dec 2004
Location: Northants
|
BCM electronic parking brake 2008 S80
Yesterday I decided to try my electronic hand brake pre MOT. The brakes engaged and released fine. After 2 minutes driving ‘Hand Brake service Require’ and yellow triangle illuminated. I’ve experienced this problem before plugged in Vida and tried to ‘Set angle and calibrate’. This reported it had completed successfully. Almost immediately after driving I was greeted by the Red triangle and warning bell. I have tried Vida again both service mode, apply brake and release brake. Every option does not complete and now reports unable to communicate with BCM. Any advice please.
|
Nov 13th, 2022, 16:22 | #2 |
VOC Member
Last Online: Today 13:12
Join Date: Feb 2013
Location: North Yorkshire
|
These earlier cars suffered with faults with the parking brake module? A lot got replaced. Do you know if the one fitted is still original?
__________________
Previous -03 S40, 04 V70 D5, 04 V70 D5 Sport, 05 V50, 07 S60 D5, 09 V70 D5 R design, 12 XC60 DrivE, 15 V60 D3 Current- 05 XC90 D5 Exec, 12 XC70 D4 AWD Se Lux, 14 S80 D3 Se Lux |
Nov 13th, 2022, 16:32 | #3 |
Junior Member
Last Online: Sep 11th, 2023 15:06
Join Date: Dec 2004
Location: Northants
|
Thanks for reply. I've downloaded the wiring diagram and managed to use a 9v battery to wind on and off the motors. Going to replace the parking brake switch tomorrow. If I don't have any joy then a phone call to volvo diagnostics.
|
Nov 15th, 2022, 09:03 | #4 |
Premier Member
|
It's usually the parking brake control module that needs replacement. It's not integrated into the switch.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|