|
XC90 '02–'15 General Forum for the P2-platform XC90 model |
Information |
|
XC90 Running BoardsViews : 733 Replies : 2Users Viewing This Thread : |
|
Thread Tools | Display Modes |
May 8th, 2012, 09:33 | #1 |
New Member
Last Online: Apr 14th, 2013 22:34
Join Date: Apr 2012
Location: Chester
|
XC90 Running Boards
Hello everyone,
Does anybody happen to know the tightening torque for the running board mounting bolts by any chance? Thanks in advance. |
May 8th, 2012, 10:11 | #2 |
Older than Junior Member
Last Online: Oct 12th, 2014 09:28
Join Date: Aug 2009
Location: Twon/City
|
"Tighten the M10 screws to 50Nm (37.5 lbf. ft.),
Tighten the M12 screws to 80Nm (60 lbf. ft.)" Quoted direct form the Volvo installation instructions. Additionally the M8 screws holding the aluminium profile to the mounting bracket at each end should be tightened to 25Nm (19 lbf. ft.) Here are the Volvo installation instructions :
__________________
2008 XC90 D5 Executive, Sandstone Beige Leather, Active Bi-Xenons, Electric Sun Roof, Roof rails, Climate Control, Twin electric front heated seats, Volvo DTi, Full integrated phone, Westfalia Tow Bar.... Last edited by Coconut; May 8th, 2012 at 10:16. Reason: Add instructions |
May 8th, 2012, 15:14 | #3 |
New Member
Last Online: Apr 14th, 2013 22:34
Join Date: Apr 2012
Location: Chester
|
Brilliant !
Thanks. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|