|
S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General Forum for the P2-platform S60 / V70 / XC70 / S80 models |
Information |
|
Water gathering in rubber door sealViews : 434 Replies : 0Users Viewing This Thread : |
|
Thread Tools | Display Modes |
May 14th, 2014, 13:58 | #1 |
Member
Last Online: Nov 27th, 2021 12:45
Join Date: Jan 2012
Location: Reading
|
Water gathering in rubber door seal
Hi all,
I'm not really sure how to describe this, or if it is even a problem. I've noticed that after rain, when I open the drivers door, there is a lot of water dripping from the rubber seal that runs around the door. This seal thing has ventilation holes in it, but they don't point downward so it is hard to understand how it is supposed to drain. Looking at the other doors, they have the same thing, but they aren't full of water. The water stays in the rubber tube, and won't dry up. I've taken to trying to dry it out with some cloth. Can anyone tell me how the water is getting in (as I can't see how), and how best to prevent this (or improve the drainage)? NO water is getting inside the car as far as I can tell. EDIT: having problems adding photos. Here is a link to some photos I took of the door and the rubber seal thing. Thanks Chris. Last edited by R3dbvll; May 14th, 2014 at 14:05. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|