|
200 Series General Forum for the Volvo 240 and 260 cars |
Information |
|
PCD adaptersViews : 879 Replies : 9Users Viewing This Thread : |
|
Thread Tools | Display Modes |
|
Aug 28th, 2018, 13:31 | #1 |
Volvo bandit
Last Online: Nov 4th, 2019 20:45
Join Date: Nov 2017
Location: Oxfordshire
|
PCD adapters
Afternoon, I have some nice wheels for my 1990 240 estate is like to fit. They are however 5x114. I’ve seen some plates that change the standard 5x108 pattern. However they are of evil bay. Can any one recommend a good place to get some.
|
Aug 28th, 2018, 13:38 | #2 |
Experienced Member
Last Online: Today 16:35
Join Date: Jun 2007
Location: L/H side
|
There are a big range of volvo wheels for a 240 I would find ones that take your fancy rather than bodge something which is most important for safety .
__________________
My comments are only based on my opinions and vast experience . |
Aug 28th, 2018, 14:09 | #3 | |
Volvo bandit
Last Online: Nov 4th, 2019 20:45
Join Date: Nov 2017
Location: Oxfordshire
|
Quote:
Thanks for the reply. I understand they are not for everyone. I would like some new wheels but the sizing am afrer and style I can not find. Ideally I would like no bigger then 16inch (I really don’t like big wheels) |
|
Aug 29th, 2018, 10:03 | #4 |
No I'm not the redhead
Last Online: Nov 25th, 2022 09:49
Join Date: Jun 2009
Location: North Yorkshire Coast
|
Superforma. Dont use anything less.
Been running Superforma 5x108 to 5x114.3 adapters on my car for 3 years and not had one single problem. I run a 30mm rear and a 20mm front because my wheels are a 17x9 ET35 and 17x8 ET38. My arches are pushed right back and its tight at the rear with the 9. With a 17x8 ET38 at the back I had bags of room with the 30mm spacer....but more is always more and I had to have the 9s. |
Aug 29th, 2018, 18:45 | #5 | |
Volvo bandit
Last Online: Nov 4th, 2019 20:45
Join Date: Nov 2017
Location: Oxfordshire
|
Quote:
Did you trim the hub studs down? |
|
Aug 29th, 2018, 22:34 | #6 |
No I'm not the redhead
Last Online: Nov 25th, 2022 09:49
Join Date: Jun 2009
Location: North Yorkshire Coast
|
I didn't have to with my wheels but my mate did. It depends on the back of your wheel. His are flat so caught the wheels dn needing trimming whereas mine have little pockets and didn't.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|