|
700/900 Series General Forum for the Volvo 740, 760, 780, 940, 960 & S/V90 cars |
![]() |
|
Anybody got banded steel's on a 940? Advice please!Views : 8916 Replies : 29Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Junior Member
Last Online: May 25th, 2021 18:05
Join Date: Sep 2016
Location: Southport
|
![]()
As the title suggests, I want to band my 15" Volvo steel wheels but not quite sure how wide I can get away with without rubbing the arches, Im going to lower the car and don't want to start cutting arches or rolling... Any advice at all is much appreciated, thanks in advance!
![]() |
![]() |
![]() |
![]() |
#2 | |
Master Member
Last Online: May 9th, 2024 05:19
Join Date: Oct 2015
Location: watford
|
![]() Quote:
|
|
![]() |
![]() |
![]() |
#3 |
Junior Member
Last Online: May 25th, 2021 18:05
Join Date: Sep 2016
Location: Southport
|
![]()
Planning on the standard 2 coils off the front 1 off the rear to be honest, don't want too much drop, been there before with a vw Bora gets tiring scraping everything! Lol
|
![]() |
![]() |
![]() |
#4 |
No I'm not the redhead
Last Online: Nov 25th, 2022 09:49
Join Date: Jun 2009
Location: North Yorkshire Coast
|
![]()
You don't want to roll or cut arches but you're not against cutting springs?
Logic...... |
![]() |
![]() |
The Following User Says Thank You to Antz For This Useful Post: |
![]() |
#5 |
Junior Member
Last Online: May 25th, 2021 18:05
Join Date: Sep 2016
Location: Southport
|
![]()
I'm not against it, I just don't want all the extra work I'd rather band my steel's but have them a sensible width so I don't need to roll or cut the wheel wells, I was just wondering if anyone had fit steel wheels to their 940 and how wide they had them done to give me an idea so I can sort of gauge how wide to go
![]() |
![]() |
![]() |
![]() |
#6 |
Steam Driven PC Owner.
Last Online: Jun 11th, 2024 15:05
Join Date: Dec 2004
Location: Not sure.
|
![]()
Volvo fitted 7x17 wheels with a 25mm offset as an option. It's a good place to start to see what will fit easily.
Have a search to see what wheels people have used. I think I remember someone fitting a 7.5 x 18 with a 30mm spacer on the back and 25mm on the front but these were front wheel drive offset wheels. Think they had to remove the plastic liners on the back though. A lot will depend on tyre size. |
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|