|
C30 / S40 & V50 '04-'12 / C70 '06-'13 General Forum for the P1-platform C30 / S40 / V50 / C70 models |
Information |
|
fault code p2008Views : 45872 Replies : 54Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Apr 10th, 2013, 07:38 | #1 |
Senior Member
Last Online: Yesterday 16:17
Join Date: Apr 2013
Location: worthing
|
fault code p2008
Hi
Have got a emissions light showing on my 2005 v50 1.8 petrol. I had the codes read by a friend the code is p2008 I checked on the web bit can't find out what it might be any one got any ideas? Thanks |
Apr 10th, 2013, 18:29 | #2 |
Senior Member
Last Online: Yesterday 16:17
Join Date: Apr 2013
Location: worthing
|
I finally found out what this fault code is for.
Intake Manifold Runner Control Circuit/Open Anyone replaced one? Can't seem to find any pictures or prices online. |
Jan 17th, 2014, 21:11 | #3 |
New Member
Last Online: May 29th, 2024 15:05
Join Date: Jan 2014
Location: N/A
|
S40 2005 1.8 Petrol
Hi there i've got an s40 2005 1.8petrol same issue same error code just happened today. Have you managed to get yours resolved?
Any information would be appreciated. Cheers, Rich. |
Jan 17th, 2014, 21:22 | #4 |
Senior Member
Last Online: Yesterday 16:17
Join Date: Apr 2013
Location: worthing
|
Yes it was the swirl control solenoids. Was done by the gar I got the car from under warranty so don't know the cost sorry
|
The Following User Says Thank You to jeffmasson For This Useful Post: |
Jan 17th, 2014, 21:37 | #5 |
New Member
Last Online: May 29th, 2024 15:05
Join Date: Jan 2014
Location: N/A
|
Hi thanks for coming back to me so quickly it's much appreciated - i'd found reference to that but mainly for diesel - good to know it solves it for petrol too. Thanks again.
|
Jan 18th, 2014, 16:50 | #6 |
New Member
Last Online: May 29th, 2024 15:05
Join Date: Jan 2014
Location: N/A
|
Fix Code P2008
Managed to fix this with a bit of carb cleaner £6 halfords and torque on Android to reset the code. Basically remove the large pipe that goes between the air filter and the inlet manifold, once it's removed clean the inside of the inlet with carb cleaner mine wasn't too bad so I didn't remove the whole assembly. Reset the code and for me at least that solved it. Fingers crossed!! Hope this helps someone. |
Jan 18th, 2014, 18:14 | #7 | |
Master Member
Last Online: Dec 31st, 2021 01:00
Join Date: Jul 2012
Location: manchester/Stockport
|
Quote:
__________________
http://giffgaff.com/orders/affiliate/noney82 click link to order a sim and experience great PAYG offers and £5 free credit when you sign up |
|
Jan 18th, 2014, 20:21 | #8 |
Senior Member
Last Online: Jun 26th, 2016 19:23
Join Date: Jan 2012
Location: Livingston
|
Hi mate the code is for the two solenoid valves (they come together ) that sit behind the hose you have removed the open the intake flaps that are internal within the intake manifold the valves have four vacuum hoses going to them the replacement parts are £55 so a cheap fix in my book?!
|
The Following User Says Thank You to Unreal master tech For This Useful Post: |
Jan 18th, 2014, 22:59 | #9 |
New Member
Last Online: May 29th, 2024 15:05
Join Date: Jan 2014
Location: N/A
|
Here's the Bluetooth Adapter I purchased from Ebay that I used with Torque on Android to reset the code.
http://www.ebay.co.uk/itm/Google-And.../190869316819? |
The Following User Says Thank You to rmdavy For This Useful Post: |
Jan 18th, 2014, 23:03 | #10 | |
New Member
Last Online: May 29th, 2024 15:05
Join Date: Jan 2014
Location: N/A
|
Quote:
|
|
Tags |
forgasser feil, solenoid valve |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|