|
XC90 '02'15 General Forum for the P2-platform XC90 model |
Information |
|
New front struts-issue?Views : 1353 Replies : 6Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Mar 28th, 2024, 20:09 | #1 |
Junior Member
Last Online: May 26th, 2024 06:59
Join Date: Oct 2021
Location: Stockton-on-tees
|
New front struts-issue?
I replaced my front end, tie rods, wishbones, vc axel and springs & shocks.
I now have a clanking noise when breaking and when full lock. This top mounts don't look right to me. Could this be my issue? |
Mar 28th, 2024, 21:52 | #2 |
Premier Member
Last Online: Yesterday 22:00
Join Date: Mar 2017
Location: Manchester
|
did you look at the spring seats ? the centre parts fail they become unbonded from the outside part its a common thing. a cheap but labour intensive fix though.
|
Mar 29th, 2024, 07:54 | #3 |
Junior Member
Last Online: May 26th, 2024 06:59
Join Date: Oct 2021
Location: Stockton-on-tees
|
I replaced the whole assembly, see attached picture. Thanks
|
Apr 1st, 2024, 19:29 | #4 |
Master Member
Last Online: Jun 22nd, 2024 11:29
Join Date: Sep 2017
Location: Norfolk
|
Looks about right, other than your dust cap is missing and the rubber fitting looks a bit distorted in those pictures but that may just be the lens on the camera.
Two thoughts. Did you torque everything up as per VIDA's directions upon refitting, and did you use Volvo original parts or some cheap aftermarket stuff. The later can be fine but the experience of members here is often that some of it really isn't. Especially top mounts and wishbones.
__________________
2007 XC90 V8 Sport |
Apr 1st, 2024, 21:27 | #5 |
Register Keeper - S80, P2, and P3
Last Online: Yesterday 22:27
Join Date: Feb 2013
Location: North Yorkshire
|
No offence intended but your picture to me shows what is known as a quick strut assembly. In my experience these are often extremely poor quality although they offer easier fitting. These are heavy cars and dont wear cheap bits that well that often leads to these sort of issues as well as poor handling.
__________________
Previous -03 S40, 04 V70 D5, 04 V70 D5 Sport, 05 V50, 07 S60 D5, 09 V70 D5 R design, 12 XC60 DrivE, 15 V60 D3 VEA Current- 05 XC90 D5 Exec, 12 XC70 D4 AWD Se Lux, 14 S80 D3 Se Lux |
The Following User Says Thank You to GrahamBrown1 For This Useful Post: |
Apr 2nd, 2024, 08:55 | #6 |
Junior Member
Last Online: May 28th, 2024 12:07
Join Date: Oct 2015
Location: Pretoria
|
Have you checked the sway bar bushes? Also had a clunk, replaced shocks and top mounts, and it turned out to be the sway bar bushes.
|
Apr 2nd, 2024, 20:34 | #7 |
Member
Last Online: Jun 18th, 2024 16:04
Join Date: Jan 2013
Location: London
|
You're better off buying a spring compressor and rebuilding onto the original struts unless they are completely shot! It's a pain but you can actually replace the bits that are shot, like the rubber bearing cup where the metal tube/bush becomes detached. i found Meyle or Febi to be fine substitutes for Volvo actual parts, in some cases the Meyle is the Volvo original..
|
The Following User Says Thank You to seandodwell For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|