Antiskid + Brake failure stop safely - Error expert needed!

[danc]

Hi all, I've still got the problem outlined in my earlier post: http://www.volvoforums.org.uk/showthread.php?t=208362

In short, my 2006 Volvo XC90 is intermittently (twice this week) showing:

• Antiskid service required
• Brake failure stop safely
• Limp mode
• Stuck at zero - speedometer, rev counter, engine temp gauge
• - in the gear mode (not D, R, N etc...)
• After the above and the engine switched off, it won't then turn over for at least an hour

I've had the codes read by my local independent Volvo garage - see photo.

There's a mass of DTCs on the print out, with all but one currently reporting A-Ok. The brake pedal sensor was initially reporting a problem during the test but was somehow cleared by the technician.

Using the print out, can anyone offer any advice? My next step is to get the garage to check the CEM (water ingress was apparently a problem on earlier XC90s but fixed in my model).