Quote:
Originally Posted by cheshired5
Multimeter set to DC Volts. 20V if it's a manual ranging meter.
Red multimeter lead into the glow plug connector, black multimeter lead on the bare metal of the engine then cycle the ignition but bear in mind the coolant temperature as mentioned previously.
It's worth saying that Dice and Vida makes this job very simple as it can activate the glow plug relay at the touch of a button and of course offer detailed diagnostic information.
|
I'll try that tomorrow then, also I have a VIDA DICE setup and I found that I reached a dead end regarding the diagnostic feedback - just ECM-6661 = Glow plug no.1 dead or the glow relay is dead/no distributing power, but nothing further downstream of that.
Nor could I find a way to independently activate the glow plug relay, do you know which section that might be in?