Suspension: Delta link bush replacement - new bolts

[rudi dudi]

@ Martin
You should be able to get some 8.8’s or 10.9’s quite easily.
They really aren’t anything special.
They are quite meaty an m12/M14 or possibly 16 with a flange head.If you cant get flange headed a washer would do.

There are no doubt countless ones out there with reused bolts.Some driving around blissfully unaware.

Anyway a blowlamp is your friend in getting the old ones out.Heat them enough and they practically walk themselves out of the axle,45 mins to an hour a side.

Don’t believe the usual forum/internet hype about being a pig of a job.It’s really a piece of cake.

Try Westfield fastners Aylesbury for replacement.
Obviously your going to have to remove them for sizing and possibly reuse your original’s till you source replacements,unless you intend to leave the car off the road.
If Westfield cant help your in trouble.