|
850 / S70 & V70 '96-'99 / C70 '97-'05 General Forum for the 850 and P80-platform 70-series models |
Information |
|
Subframe RemovalViews : 12185 Replies : 71Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Mar 7th, 2010, 10:35 | #11 |
Experienced Member
Last Online: Today 14:20
Join Date: Jun 2007
Location: L/H side
|
dont forget new bolts as all the suspension bolts are stretch "use once only" bolts
The 4 subframe bolts , the wishbone bolts , lower ball joint clamping bolts , horizontal lower strut bolts , I've seen a lower ball joint clamping bolt break after being used twice , the ball joint then detaches causing the wheel to flail about , not recommended ... Stretch bolts act like plastic after being used once , they will tighten and tighten and stretch with insuficient clamping force . They wont do up and get tighter and tighter as will normal nuts and bolts . use the angle torque too , those 4 subframe bolts need a LOT of energy to tighten correctly .
__________________
My comments are only based on my opinions and vast experience . |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|