|
S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General Forum for the P2-platform S60 / V70 / XC70 / S80 models |
Information |
|
V70 2006 stainless steel exhaustViews : 965 Replies : 6Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Nov 11th, 2015, 15:11 | #1 |
Junior Member
Last Online: Yesterday 23:01
Join Date: Mar 2015
Location: Cirencester
|
V70 2006 stainless steel exhaust
Hello
Has anybody fitted a stainless steel exhaust to their V70? My 2006 2.5T is running it's original Volvo system but both the middle and rear back box mounting points have now rusted off. I am thinking of fitting a stainless steel system (cat back) as the car is a 'keeper'. Any particular makes that you would recommend - Jetex?? Any particular suppliers/fitters. I am in Gloucestershire. Thank you for any pointers. |
Nov 11th, 2015, 15:43 | #2 |
Rob
Last Online: Dec 22nd, 2019 21:37
Join Date: Mar 2014
Location: Flintshire
|
Hi I have a 07 plate s60 2.5t and I fitted a ferrita stainless cat back exhaust to replace the original volvo one with had a hole in the back box. It ain't noisy and there is no droning at speed either.
You can get them from here - http://kalmar-union.com/parts/volvo-...v70_-exhausts/ |
Nov 11th, 2015, 16:59 | #3 |
2011 XC70 D5 215BHP
Last Online: Mar 8th, 2017 08:58
Join Date: Jul 2015
Location: Birmingham
|
A few years back I had a custom one made whilst I waited on my mondeo st at mij performance in Walsall for a lot less than I imagined it would cost... From memory it was around £300
Did a quick Google and found this http://www.infinity-exhausts.co.uk if they are anywhere near you as they do a similar thing it seems Hope it helps :-) |
Nov 11th, 2015, 19:50 | #4 |
Master Member
Last Online: May 29th, 2024 10:48
Join Date: Dec 2004
Location: Stratford-upon-Avon
|
+1 for the Ferrita stainless steel exhaust via Don (Kalmar Union).
See post number 3 in the following thread I started having asked much the same question as yourself. I am still happy with my purchase and no longer notice the slight boom below 1100RPM. With some carbon inside it the exhaust is now precious little different noise level wise to the standard exhaust when driving - but still with the nice muted burble to it. I have no qualms recommending it. http://www.volvoforums.org.uk/showthread.php?t=233760
__________________
2003 V70 2.4T SE | Owned from new | M56 | Bilstein B4 | Nivomats | BSR PPC | Ferrita Exhaust | Poly small bush in lower torque mount 2008 C30 T5 SE Sport R-Design | Dynaudio | BLIS | Winter Pack | Towbar | Parking Control | Keyless | 18" Atreus Last edited by 2.4TSE; Nov 11th, 2015 at 19:54. |
Nov 11th, 2015, 20:18 | #5 |
Senior Member
Last Online: Today 17:25
Join Date: Dec 2008
Location: Lincoln
|
One question.....
Do you actually want a new system or is because the hangers have rusted off you want to put a better quality system on? If it's because the hangers have gone you can get Volvo bolt-on kits for probably £15-20 a piece and you'll save a lot of money. It's a common issue and easily fixable.
HTH, Nobby |
Nov 13th, 2015, 13:56 | #6 |
Junior Member
Last Online: Yesterday 23:01
Join Date: Mar 2015
Location: Cirencester
|
Thank you for the pointers on where to buy a system - I will investigate.
Nobby, yes the hangers have previously rusted off and I have already bypassed these with the 'clamp on' style hangers. To be honest the rest of the system and back box in particular are past there best. thank you |
Nov 13th, 2015, 15:47 | #7 |
I've Been Banned
Last Online: Mar 19th, 2016 19:57
Join Date: Oct 2013
Location: Yondershire
|
http://www.volvoforums.org.uk/showthread.php?t=236130
Oops, you want a stainless number, my mistake. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|