|
S60 & V60 '11-'18 / XC60 '09-'17 General Forum for the P3-platform 60-series models |
Information |
|
2012 V60 caliper carrier boltsViews : 516 Replies : 8Users Viewing This Thread : |
|
Thread Tools | Display Modes |
May 10th, 2024, 20:22 | #1 |
New Member
Last Online: May 31st, 2024 18:37
Join Date: Sep 2022
Location: Runcorn
|
2012 V60 caliper carrier bolts
Hello,
Currently replacing the rear brake discs on my 2012 V60 1.6 Diesel. I need to replace the caliper carrier bolts as when I was tightening the bolts back up after refitting the carrier, one of the heads started to round. I've been unable to find any online. Any ideas where I can get a set? Also, is 200Mm the correct torque? Seems very high to me. Thanks Pete |
May 10th, 2024, 22:04 | #2 | |
Experienced Member
Last Online: Yesterday 23:26
Join Date: Jun 2007
Location: L/H side
|
Quote:
__________________
My comments are only based on my opinions and vast experience . |
|
May 13th, 2024, 09:48 | #3 |
Junior Member
Last Online: Yesterday 13:07
Join Date: May 2016
Location: Manchester
|
The rear calliper bracket bolts are 110Nm on my 2015 S60.
|
May 14th, 2024, 08:41 | #4 |
Member
Last Online: Yesterday 16:30
Join Date: Mar 2008
Location: Stamford
|
It's 200 Nm on my 2012 so seems year dependent. I bought some new bolts off Volvo. About £4 each so not bad...
__________________
Current: 2012 S60 D3 Previous: 2004 V40 1.9D; 2004 V70 D5, 1997 V40 1.9D, 1986 340GL and 1984 340 Saloon, |
May 14th, 2024, 09:45 | #5 |
Premier Member
Last Online: Jun 17th, 2024 08:52
Join Date: Nov 2013
Location: Newark
|
200Nm seems very high to me. Most standard torque wrenches only go up to about 210Nm.
__________________
XC60 2013 D5 215 SE Lux Nav geartronic |
May 14th, 2024, 18:03 | #6 |
Member
Last Online: Yesterday 16:30
Join Date: Mar 2008
Location: Stamford
|
I agree it seems a lot. But it is what VIDA recommends for my 2012 D3 and I've seen a few youtube videos where they are a sod to remove.
Hopefully someone more experienced will chime in with the (right) answer.....
__________________
Current: 2012 S60 D3 Previous: 2004 V40 1.9D; 2004 V70 D5, 1997 V40 1.9D, 1986 340GL and 1984 340 Saloon, |
May 17th, 2024, 19:51 | #7 |
Member
Last Online: Yesterday 16:30
Join Date: Mar 2008
Location: Stamford
|
Just done the job this pm. Based on the amount of force that was needed to remove the old ones, I suspect 200Nm is correct for a 2012 S60
__________________
Current: 2012 S60 D3 Previous: 2004 V40 1.9D; 2004 V70 D5, 1997 V40 1.9D, 1986 340GL and 1984 340 Saloon, |
May 21st, 2024, 21:07 | #8 | |
Junior Member
Last Online: May 29th, 2024 15:27
Join Date: Sep 2016
Location: Durham
|
Quote:
__________________
2015 d4 r design lux nav winter pack / driver pack. Keyless, Saville grey. |
|
May 22nd, 2024, 07:30 | #9 | |
New Member
Last Online: May 23rd, 2024 18:00
Join Date: May 2024
Location: Indianapolis
|
Quote:
Cheers! |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|