|
XC90 '02–'15 General Forum for the P2-platform XC90 model |
Information |
|
Rear bulb replacementViews : 537 Replies : 3Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Nov 5th, 2017, 09:07 | #1 |
Member
Last Online: Aug 19th, 2023 20:56
Join Date: Aug 2017
Location: Belfast
|
Rear bulb replacement
Need to replace a brake light bulb, but interior panel doesn't seem to want to come off to allow access to light unit nuts and don't want to force and break it.
Is there a nack to this or just brute force and ignorance Cheers |
Nov 5th, 2017, 09:18 | #2 |
Master Member
Last Online: Yesterday 16:57
Join Date: Sep 2017
Location: Norfolk
|
You need to remove some floor trim first.
Remove the "curry carrier" by lifting the flap up and releasing the two retaining straps. You can then lift it out. Then on the side of interest, lift out the small, triangular polystyrene filler block in the floor, next to the lighting access panel. With that out of the way, you should see a small plastic/metal tab at the bottom of the access panel- should be a simple matter to pull it up and towards you. If you force it as it is, you'll likely split the polystyrene block. |
Nov 5th, 2017, 09:26 | #3 |
Volvo Driver
Last Online: Today 15:19
Join Date: Mar 2016
Location: Basingstoke
|
Rear Lamp change
What Moose said...
It's covered in the owner handbook. If you haven't got one, they are available on line here https://www.volvoclub.org.uk/xc90manual.shtml Cheers Dave Last edited by Harley Dave; Nov 5th, 2017 at 09:28. Reason: Added link to manuals |
Nov 5th, 2017, 12:18 | #4 |
Member
Last Online: Aug 19th, 2023 20:56
Join Date: Aug 2017
Location: Belfast
|
Cheers dudes, have the handbook here but from what I'd seen just said remove panel, didn't mention what you've pointed out.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Display Modes | |
|
|