|
400 Series General Forum for the Volvo 440, 460 and 480 cars |
![]() |
|
oil sprayer jets ???Views : 752 Replies : 6Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Guest
Location:
|
![]()
does any one out there know the part number for an oil sprayer jet for a 1993 B20f engine, needed to finish off my rebuild, please help, my local volvo dealer says there in no part number but find that hard to believe as the part is listed in the 'haynes'
|
![]() |
![]() |
#2 |
Forum Support Team
Last Online: May 28th, 2024 10:43
Join Date: Jan 1970
Location: Glasgow, London
|
![]()
There's two different types of sprayer jets on my diagram and the quantity says 4 of each.
3342383 3342384 Hope that helps. Last edited by pettaw; May 28th, 2006 at 18:53. |
![]() |
![]() |
![]() |
#3 |
Guest
Location:
|
![]()
thanx for those numbers m8, would u know if they are for the pre-facelift and the facelift models, as im aware there is a small bhp difference between the two would this make the jets two different fluid capacity sizes ??? i have a spare B20f engine and could swap over those jets but this engine is from a facelift model and my engine im rebuilding is not, would this matter ??? any response would be appreciated.
|
![]() |
![]() |
#4 |
Forum Support Team
Last Online: May 28th, 2024 10:43
Join Date: Jan 1970
Location: Glasgow, London
|
![]()
Wouldn't know tbh, but the diagrams seem to say no difference.
|
![]() |
![]() |
![]() |
#5 |
Guest
Location:
|
![]()
thanx again fella, am just gona strip the jets from my newer B20f an hope theyre ok, am hoping to get my car back this week if all goes well after the oil sprayer jet fiasco. just curious, what does 'tbh' stand for ?
![]() |
![]() |
![]() |
#6 |
Senior Member
Last Online: Mar 2nd, 2023 14:47
Join Date: May 2006
Location: Manchester
|
![]()
sorry to ask an obvious question but why do you need to change the oil sprayers for this rebuild?
cheers shimon |
![]() |
![]() |
![]() |
#7 |
Guest
Location:
|
![]()
when stripping the block to bits i noticed that 2 of the shells were lightly scored, then noticed that 1 of the oil sprayers had broken(must have been due to heavy spannering) and the other 1 wasnt spraying at its full capacity resulting in the aforementioned scored shells. the point of this build is to get the engine strong enough to run the nos without having to rebuild it for every bottle load of the funny stuff.
|
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|