|
XC90 '02'15 General Forum for the P2-platform XC90 model |
Information |
|
injector problemsViews : 667 Replies : 3Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Apr 4th, 2014, 22:37 | #1 |
New Member
Last Online: Apr 5th, 2014 07:37
Join Date: Apr 2014
Location: Kvinesdal
|
injector problems
Hey,bjorn from norway here,
I got injector tapping noise after i replaced injector for the third time. They wre all overhald. Was told på seller to change the last two.Did so,still got the noise between 2-3000rpm. I now have five replasment injectors,dont know what to do Heeeeelp. If anyone has injector test result,,bosch ,,,pls email,,,,bolezen01@gmail.com Think I will test all seven of mine injectors at a bosch center to see the differance and mount the ones that are most equal,,,,sorry for bad english,,,, Anyone with any good ideas of what to do, Maybe buy a org.volvo.injec. and mount back the two old one i got,i will then have three org.volvo and two overhauld...?. Br Bjorn Last edited by bolezen; Apr 4th, 2014 at 22:57. |
Apr 4th, 2014, 22:56 | #2 |
Premier Member
Last Online: Dec 26th, 2021 13:42
Join Date: Dec 2013
Location: Crewe
|
Did you fit new mounting kits to each injector as you replaced them?
Did you spotlessy clean the injector port before installing your new injectors? Both are very important.
__________________
2002 S60 SE D5 Manual 209000 miles |
Apr 5th, 2014, 08:19 | #3 |
Senior Member
Last Online: Apr 2nd, 2024 15:50
Join Date: Dec 2003
Location: Oise
|
Not all Bosch dealers can overhaul these injectors.
They must be coded with a value for the flow rate, and all must be within a set amount. It will be easier to fit a complete set, as it will be difficult to recode just 2 or 3 in the set. The engine ECU will need to be recoded for the new injectors with the Vida tool. John |
Apr 5th, 2014, 15:45 | #4 | |
Experienced Member
Last Online: Today 11:15
Join Date: Jun 2007
Location: L/H side
|
Quote:
__________________
My comments are only based on my opinions and vast experience . |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|