Dash connector from a 960??

colinstubbs · May 11th, 2014, 20:47

As the title, I'm after the Dash connector from a 960 with say 6" of the wires attached please.

Looks like this...

mrmeringo · May 11th, 2014, 20:51

Whats it actually for??

colinstubbs · May 11th, 2014, 21:19

Chopping to retro fit a coolant level guard cable from the engine bay to illuminate a warning lamp on the dash - I'd actually only need the grey/orange wire at the top with its pin but I'm not totally sure if my connector will have a space for it hence asking for the whole thing - I can always swap all the other pins over too

Skyedriver · May 11th, 2014, 22:39

If this is the same as a 940 LPT, i can help you out there

colinstubbs · May 11th, 2014, 23:03

Hi Skydriver, if your 940 LPT has the expansion tank with the level guard low level warning bit in it then you may well be able to help - I mentioned 960s cos they all deffo had it!!

Skyedriver · May 11th, 2014, 23:37

Don't think it had TBH and the exp tank has now been sold.
Any other way of telling, I'll have a look tomorrow evening.
Tony H

colinstubbs · May 11th, 2014, 23:45

if it had the level guard there would have been a two-pin plug that would have plugged into a socket mounted on the bottom of the vent pipe end of the tank that I assume would be hanging around!!

May 11th, 2014, 20:47	#1
colinstubbs Member Last Online: Nov 5th, 2022 11:46 Join Date: Sep 2010 Location: west malling	Dash connector from a 960?? As the title, I'm after the Dash connector from a 960 with say 6" of the wires attached please. Looks like this... __________________ *J-plate 2.0, 940 GL Estate - 160,650*

May 11th, 2014, 21:19	#3
colinstubbs Member Last Online: Nov 5th, 2022 11:46 Join Date: Sep 2010 Location: west malling	Chopping to retro fit a coolant level guard cable from the engine bay to illuminate a warning lamp on the dash - I'd actually only need the grey/orange wire at the top with its pin but I'm not totally sure if my connector will have a space for it hence asking for the whole thing - I can always swap all the other pins over too __________________ *J-plate 2.0, 940 GL Estate - 160,650*

May 11th, 2014, 23:03	#5
colinstubbs Member Last Online: Nov 5th, 2022 11:46 Join Date: Sep 2010 Location: west malling	Hi Skydriver, if your 940 LPT has the expansion tank with the level guard low level warning bit in it then you may well be able to help - I mentioned 960s cos they all deffo had it!! __________________ *J-plate 2.0, 940 GL Estate - 160,650*

May 11th, 2014, 23:45	#7
colinstubbs Member Last Online: Nov 5th, 2022 11:46 Join Date: Sep 2010 Location: west malling	if it had the level guard there would have been a two-pin plug that would have plugged into a socket mounted on the bottom of the vent pipe end of the tank that I assume would be hanging around!! __________________ *J-plate 2.0, 940 GL Estate - 160,650*

May 11th, 2014, 20:51	#2
mrmeringo Tommy Meringo Last Online: Jun 28th, 2020 16:04 Join Date: Mar 2011 Location: Liverpool View Photos By: mrmeringo	Whats it actually for??

May 11th, 2014, 22:39	#4
Skyedriver Master Member Last Online: Today 20:11 Join Date: Aug 2007 Location: Oban	If this is the same as a 940 LPT, i can help you out there

May 11th, 2014, 23:37	#6
Skyedriver Master Member Last Online: Today 20:11 Join Date: Aug 2007 Location: Oban	Don't think it had TBH and the exp tank has now been sold. Any other way of telling, I'll have a look tomorrow evening. Tony H

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)