1800: - Boot Will Not Close! - Page 2

saintcar · May 20th, 2014, 12:34

I have had trouble with trying to get the boot lid to fit comfortably. It shuts and locks okay but never fits flush due to the rubber seal. How should the seal be fitted. Is it suppose to be mounted along the protruding edge (lip) of the boot hatch opening. Or does it sit in the recess?

andrew111 · May 20th, 2014, 15:24

Its probably easiest to show you a couple of photos to explain how it goes on.
As mentioned above I would recommend using the 3m glue from Brook-house. Good luck.

saintcar · May 20th, 2014, 16:50

Thanks for that. I think mine was never fitted properly all the way around the edge. I have ordered clue from Brookhouse to give it another go.

Groundes-Peace · May 20th, 2014, 19:30

You will also need to consider drainage from the boot lip area. The P1800 needs careful thought when it comes to the run-off of rain water!!

May 20th, 2014, 12:34	#11
saintcar Junior Member Last Online: Nov 10th, 2018 15:22 Join Date: Oct 2008 Location: Essex	how do you put the rubber on? I have had trouble with trying to get the boot lid to fit comfortably. It shuts and locks okay but never fits flush due to the rubber seal. How should the seal be fitted. Is it suppose to be mounted along the protruding edge (lip) of the boot hatch opening. Or does it sit in the recess?

May 20th, 2014, 16:50	#13
saintcar Junior Member Last Online: Nov 10th, 2018 15:22 Join Date: Oct 2008 Location: Essex	Thanks for that. I think mine was never fitted properly all the way around the edge. I have ordered clue from Brookhouse to give it another go.

May 20th, 2014, 19:30	#14
Groundes-Peace Master Member Last Online: Mar 14th, 2024 17:23 Join Date: Jun 2009 Location: Milton Keynes	You will also need to consider drainage from the boot lip area. The P1800 needs careful thought when it comes to the run-off of rain water!!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)