|
S80 '06-'16 / V70 & XC70 '07-'16 General Forum for the P3-platform S80 and 70-series models |
![]() |
|
Stalling/cutting out!!!Views : 922 Replies : 1Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
New Member
Last Online: Jul 17th, 2016 15:35
Join Date: May 2016
Location: tredegar
|
![]()
Hi guys and gals,
V70 2.4 W plate, i'm assuming 1999?? So i have some problems, 1. engine cuts out, not everytime, but most times, approaching junctions dip the clutch and the engine dies, if i go down through the gears and get the revs down low it doesn't, but if i dip the clutch from 2000 rpm and above it will stall. 2. ECU light is on, had a computer on it and its only saying Temp sensor, the engine never gets hot, i have checked the level and thats ok, so which sensor require changing, and is it connected to issue No.1? 3. Abs light is on, all breaks are fine pad wise, but the rear right disc is corroded both sides, so is that a seized caliper? In anticipation of the inspiring answers im going to get from the wonderful people here, thank you. ![]() |
![]() |
![]() |
![]() |
#2 |
VOC Member
Last Online: Jan 6th, 2024 16:59
Join Date: Aug 2010
Location: Staffordshire
|
![]()
Welcome to the forum. You're not quite in the right place yet as this section is for the Phase 3 models. Not sure if yours is a P1 or P2 so have a look here http://www.volvoforums.org.uk/index.php and see if you can find the correct one. You'll stand a much better chance of decent answers - virtually everyone is helpful.
Good luck.
__________________
Current - 2008 V70 SE Lux D5 185, 2005 XC70 SE D5 163. Previous - 2003 V40 SE 2.0 T,1997 940 CLASSIC 2.3 HPT Estate, 1996 940 SE 2.3 HPT Estate, 1993 940 S 2.0 Estate. |
![]() |
![]() |
![]() |
Tags |
2.4 petrol, cutting out, non-turbo, stalling, v70 |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|