|
![]() |
|
DEM bits wanted for testingViews : 782 Replies : 1Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Premier Member
Last Online: Today 08:02
Join Date: Aug 2008
Location: Newcastle
|
![]()
My 04 AWD R is still showing DTC DEM005. which is a solenoid problem in the DEM controller. However the DEM controller was supposedly checked over by BBA reman who said the unit was OK, but I have had difficulty confirming 100% they were able to check to pressure switch and the solenoid.
Does anyone have a spare solenoid+pressure switch I could borrow for testing. A full DEM controller is no use - coded to car but components are NOT. The pump unit is fine. I've had 12V across the terminals and it rotates both ways freely. I had the chance of bits from an 04 XC70 - but waited for better weather - yard crushed it yesterday .... ![]() Cheers Bob |
![]() |
![]() |
![]() |
#2 |
Premier Member
Last Online: Today 08:02
Join Date: Aug 2008
Location: Newcastle
|
![]()
...Bump... Anyone got a duff pressure sensor or solenoid valve??? substituting a duff one should/might give me additional DTC codes. I may even be able to prove the existing units are sound.
I have understood a bit more about the solenoid - mine does actually jump into life literally, when 9V is shorted across the terminals intermitantly - trying to mimic a variable pulse width signal??? Still only the one DTC DEM-0005 and no anti skid or other "service required" messages in the DIM. Car now has full 12month MOT too. Cheers Bob |
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|