Sachs clutch, pressure plate and dual mass flywheel

Ashc · Oct 12th, 2016, 11:47

As above, removed from my 940 turbo sport. The clutch and pressure plate have done 14,000 miles, with receipt from Mr clutch to confirm mileage. The clutch worked perfectly when removed. I only removed it because I've upgraded to an 850r clutch.
I'm looking for £30 collected from WS41EG.
Can email pics if required.

jor · Oct 12th, 2016, 15:55

Can I ask which gearbox this will fit?

jor

Ashc · Oct 12th, 2016, 17:35

Sorry, should have put it in the advert. It's for an M90 gearbox.

Richard Dobson · Oct 18th, 2016, 16:17

Hi, wanting this to fit a 960 24 valve, for conversion from an auto. when you say the flywheel, this is the part bolted directly to the end of the crankshaft I am not familiar with the dual mass unit.
The 850 unit you got what price was this.

Richard

Ashc · Oct 18th, 2016, 20:28

Yes, it bolts to the crankshaft with eight bolts. I'm not familiar with the 24 valve engines, I'm not sure my flywheel would fit, but maybe someone can confirm this?

To use the 850r clutch, I had to get a flywheel from an older 940 and have it machined flat and balanced. It cost about £300 including the clutch. Again, I'm not sure this would work on a 24v motor.

sarge3uk · Oct 27th, 2016, 18:00

Hi is this still available

Ashc · Nov 7th, 2016, 20:45

Sorry, only just noticed your message. Yes, it's still available.

Rumbo · Nov 7th, 2016, 20:48

Hello mate,could you post this?

Oct 12th, 2016, 11:47	#1
Ashc Member Last Online: Feb 15th, 2024 21:13 Join Date: Jul 2012 Location: Walsall	Sachs clutch, pressure plate and dual mass flywheel As above, removed from my 940 turbo sport. The clutch and pressure plate have done 14,000 miles, with receipt from Mr clutch to confirm mileage. The clutch worked perfectly when removed. I only removed it because I've upgraded to an 850r clutch. I'm looking for £30 collected from WS41EG. Can email pics if required.

Oct 12th, 2016, 15:55	#2
jor VOC 20573 Last Online: Jul 10th, 2023 22:14 Join Date: Mar 2007 Location: wembley	Can I ask which gearbox this will fit? jor __________________ Volvo 940 SE 1994 D24Tic. BMW C1 85 mpg

Oct 12th, 2016, 17:35	#3
Ashc Member Last Online: Feb 15th, 2024 21:13 Join Date: Jul 2012 Location: Walsall	Sorry, should have put it in the advert. It's for an M90 gearbox.

Oct 18th, 2016, 16:17	#4
Richard Dobson Junior Member Last Online: Sep 8th, 2020 14:56 Join Date: Jul 2010 Location: Newton Stewart	Hi, wanting this to fit a 960 24 valve, for conversion from an auto. when you say the flywheel, this is the part bolted directly to the end of the crankshaft I am not familiar with the dual mass unit. The 850 unit you got what price was this. Richard

Oct 18th, 2016, 20:28	#5
Ashc Member Last Online: Feb 15th, 2024 21:13 Join Date: Jul 2012 Location: Walsall	Yes, it bolts to the crankshaft with eight bolts. I'm not familiar with the 24 valve engines, I'm not sure my flywheel would fit, but maybe someone can confirm this? To use the 850r clutch, I had to get a flywheel from an older 940 and have it machined flat and balanced. It cost about £300 including the clutch. Again, I'm not sure this would work on a 24v motor.

Oct 27th, 2016, 18:00	#6
sarge3uk Junior Member Last Online: Feb 8th, 2018 15:47 Join Date: Sep 2010 Location: sheffield	Hi is this still available

Nov 7th, 2016, 20:45	#7
Ashc Member Last Online: Feb 15th, 2024 21:13 Join Date: Jul 2012 Location: Walsall	Sorry, only just noticed your message. Yes, it's still available.

Nov 7th, 2016, 20:48	#8
Rumbo Time Traveller Last Online: Oct 12th, 2023 00:08 Join Date: May 2016 Location: Cornwall	Hello mate,could you post this?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)