|
XC90 '02–'15 General Forum for the P2-platform XC90 model |
Information |
|
Angle gear bearing replacementViews : 245 Replies : 1Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Feb 28th, 2019, 19:39 | #1 |
New Member
Last Online: Nov 10th, 2023 07:53
Join Date: Nov 2008
Location: Bristol
|
Angle gear bearing replacement
Does anyone have a list of part numbers for the bearings and seals in the angle gear of a 2005 automatic?
Thanks Nick |
Mar 1st, 2019, 09:25 | #2 |
Master Member
Last Online: Yesterday 20:01
Join Date: Dec 2016
Location: Southend on sea
|
Hi nick, no answers to date and I am no expert, but have read on this forum that it is not as simple as just replacing components on the transfer box. I hear that they have to be shimmed and set up.
I would suggest it far better to buy a second hand unit from eBay. There is one currently listed at £250. In my limited experience, the main wear is usually on the input shaft where the spline drive fails, so a second hand unit with the splines in good condition should suit fine. This was the case with me and I managed to get a one year warranty on my second hand unit. (Volvo Saab breakers ltd). But if you do go ahead, good luck and keep us posted. John l |
The Following User Says Thank You to john langrick For This Useful Post: |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|