|
C30 / S40 & V50 '04-'12 / C70 '06-'13 General Forum for the P1-platform C30 / S40 / V50 / C70 models |
Information |
|
Driver's heated seat not workingViews : 923 Replies : 3Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Dec 2nd, 2020, 16:13 | #1 |
New Member
Last Online: Nov 10th, 2023 15:33
Join Date: Dec 2020
Location: Suffolk
|
Driver's heated seat not working
Hi all,
I'm new here and this is my first post. Have spent the last couple of hours searching and reading and have learnt lots but just want to double check my findings before proceeding. (Great forum btw, have learnt loads about my car along the way!) I've recently acquired a 2008 C30 R-Design with heated seats and now the cold weather is here I've discovered the driver's side heated seat is not working. Passenger side is fine. The lights on the switch are coming on but the seat stays cold. I checked the fuse box today and found the fuse for the driver's side seat was missing. Put the passenger side fuse in but still not working. I'm guessing the previous owner removed the fuse for a reason, potentially because the module under the seat may have failed? I found this link which says a faulty module can cause issues with ACC interior temperature regulation. If true that would make sense as to why the fuse has been remove but would there be any other reasons as to why the fuse was removed? https://www.skandix.de/en/spare-part...-seat/1040980/ From my reading on here the next step would be to test using the module from the passenger seat? That being the case are they easy to remove? is it just a case of undoing the retaining bolt and unplugging the connectors? Thanks in advance, any advice appreciated. Last edited by Chilliflavour; Dec 2nd, 2020 at 16:23. |
Dec 2nd, 2020, 16:47 | #2 |
Senior Member
Last Online: Oct 30th, 2023 18:03
Join Date: May 2011
Location: Southampton
|
Hi and welcome
A good investment would probably be a VIDA setup, its the proper volvo diagnostics and has guided steps to fix/diagnose pretty much anything. It would be able to identify if the module is present, connected and whether the seat element itself is intact. Do the driver and passenger seats match well? The R-Design seats can age badly and its possible someone swapped a worn drivers seat for a replacement without heating fitted (I believe it was on optional extra on R-Designs). |
Dec 2nd, 2020, 17:18 | #3 |
New Member
Last Online: Nov 10th, 2023 15:33
Join Date: Dec 2020
Location: Suffolk
|
Hi and thanks for the reply.
The driver's seat looks a lot older than the passenger (passenger is VGC) but the car has only done 54k miles and the driver's seat condition seems about right for the age/miles. I'll look into a VIDA setup as that does sound like a good bit of kit to have but I guess I could still try swapping the module in the meantime? I've checked under the driver's seat and it does have the same module as the passenger side with all the same connectors plugged in. |
Dec 3rd, 2020, 08:46 | #4 | |
Senior Member
Last Online: Oct 30th, 2023 18:03
Join Date: May 2011
Location: Southampton
|
Quote:
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|