Body/Trim: - V is for Volvo...

phlukanad · Aug 4th, 2007, 20:02

... and V is for Very embarrassed! Just been doing a dummy run with fitting a a rear strap-on bike rack on my 06 XC90 and in the process managed to dislodge the 'V' on the rear 'VOLVO' badge.

Can anyone recommend the best method of re-gluing it?

I'd rather not face the humiliation of explaining this to my local dealer,not withstanding the "tut-tuts" and exaggerated accompanying bill!

Thanks in advance!

Viper_7 · Aug 4th, 2007, 20:12

Now it's moved - why not just remove the badge completly?

Bit of fine fishing wire behind the badge with the aid of your favourite hairdryer will soon have it off.

Same way can be used to reposition. Couldn't advise what glue to use though.... would think it's rubber based. Would need to use a suitable glue or the surouding paint work may bedamaged in time by it.

Vipes

CTCNetwork · Aug 5th, 2007, 00:35

Hi,

If you are determined to re-fit the V then use double sided pads - halfrauds sell them for keeping rearview mirrors fixed to screens.

You'll need to clean off the old sticky from tailgate and letter.
Then attach the new tape bit by bit to the rear of the V - trimming to fit.

Next you need work out exactly the angle of the V and distance from the O so it looks right..

Des. . .

Aug 4th, 2007, 20:02	#1
phlukanad New Member Last Online: Feb 15th, 2015 17:02 Join Date: Apr 2006 Location: St Albans	V is for Volvo... ... and V is for Very embarrassed! Just been doing a dummy run with fitting a a rear strap-on bike rack on my 06 XC90 and in the process managed to dislodge the 'V' on the rear 'VOLVO' badge. Can anyone recommend the best method of re-gluing it? I'd rather not face the humiliation of explaining this to my local dealer,not withstanding the "tut-tuts" and exaggerated accompanying bill! Thanks in advance!

Aug 4th, 2007, 20:12	#2
Viper_7 Premier Member Last Online: Aug 30th, 2013 17:33 Join Date: Apr 2006 Location: York	Now it's moved - why not just remove the badge completly? Bit of fine fishing wire behind the badge with the aid of your favourite hairdryer will soon have it off. Same way can be used to reposition. Couldn't advise what glue to use though.... would think it's rubber based. Would need to use a suitable glue or the surouding paint work may bedamaged in time by it. Vipes __________________ S60 D5 SE 2004 Titanium Grey Winter Pack Mods: Volvo Tax disc holder - increases power output by 5% Child Seat Rear and side Volvo fitted blinds. Tree Sap from May - July. Removed at least 46 cup holders for weight reduction.

Aug 5th, 2007, 00:35	#3
CTCNetwork Forum Support Team Join Date: Dec 2004 Location: Liège, Belgium View Photos By: CTCNetwork	Hi, If you are determined to re-fit the V then use double sided pads - halfrauds sell them for keeping rearview mirrors fixed to screens. You'll need to clean off the old sticky from tailgate and letter. Then attach the new tape bit by bit to the rear of the V - trimming to fit. Next you need work out exactly the angle of the V and distance from the O so it looks right.. Des. . . __________________ Density:- Not just a measurement ~ It's a whole way of Life.! ! ! I drive a Volvo, Please Don't Get In My Way! OldVolvos4Ever He shows up. People die. He vanishes. People should not be afraid of their governments. "He'll deliver more justice in a weekend than 10 years of your Governments should be afraid of their people... "V" courts & tribunals. Just stay out of his way." "I plan to."

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)