|
![]() |
|
Coolant System Malfunction - temperature guage not workingViews : 807 Replies : 5Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
New Member
Last Online: Jun 10th, 2024 17:07
Join Date: Sep 2023
Location: Northern Ireland
|
![]()
Hi all, I'm new to the forum, have a 2015 V40 RDesign Lux D4 Vea.
I bought the car with this fault "coolant system Malfunction, service required". I replaced the coolant temperature sensor about 5 months ago with a genuine Volvo replacement, and it didn't fix it immediately, but after about 2-3 days it just began to work, and continued for about 3 months. Fast forward to now, I'm back having no coolant temperature reading on the dash most of the time, although sometimes when you start the car the reading shows for about 5 seconds and then goes back down to the bottom. I had it plugged into VIDA and I got 2 codes for intake air temperature sensor (which I have now cleaned as it was caked in soot), one code for coolant temperature sensor, 2 codes related to invalid data received from ECM/PCM and one code for software incompatibility with ECM/PCM. I'm struggling to know what to do next with it, I can't understand the reason why it shows a reading at times or 5 seconds on start up then it goes away again. Any help greatly appreciated |
![]() |
![]() |
The Following User Says Thank You to Rd070707 For This Useful Post: |
![]() |
#2 |
New Member
Last Online: Jun 10th, 2024 17:07
Join Date: Sep 2023
Location: Northern Ireland
|
![]()
I should have added that the fans run all the time, and the car and heaters does generate good heat
|
![]() |
![]() |
The Following User Says Thank You to Rd070707 For This Useful Post: |
![]() |
#3 |
New Member
Last Online: Jun 10th, 2024 17:07
Join Date: Sep 2023
Location: Northern Ireland
|
![]()
Anybody?
|
![]() |
![]() |
The Following User Says Thank You to Rd070707 For This Useful Post: |
![]() |
#4 |
New Member
Last Online: Jun 10th, 2024 17:07
Join Date: Sep 2023
Location: Northern Ireland
|
![]()
I have attached a screenshot of codes I have on VIDA.
When codes were cleared the temperature gauge did work again temporarily but stopped again the next morning. I am now thinking of a few possible issues: 1- battery was replaced before we got the car. Could it have been done incorrectly? Does it need calibrated or anything? 2- intake air temperature sensor. Is it part of the MAF or MAP on these? Would be happy to try a known good sensor from another car to troubleshoot and see if it helps 3- ECM water damage? Is this common in these? Final step may end up being to remove ECM and inspect Thanks in advance if anyone has any insight |
![]() |
![]() |
![]() |
#5 |
New Member
Last Online: Jun 10th, 2024 15:32
Join Date: Jun 2024
Location: Kilwinning
|
![]()
[QUOTE=Rd070707;291
Did anyone get this resolved- I have a 2016 XC60 with the same issue shortly after a service comes up Coolant System Malfunction Service Required - struggling to have it repaired |
![]() |
![]() |
![]() |
#6 |
New Member
Last Online: Jun 10th, 2024 17:07
Join Date: Sep 2023
Location: Northern Ireland
|
![]()
[QUOTE=AyrshireMan;2953371][QUOTE=Rd070707;291
Did anyone get this resolved- I have a 2016 XC60 with the same issue shortly after a service comes up Coolant System Malfunction Service Required - struggling to have it repaired[/QUOTE] Yes I fixed it. In my case with codes listed it was the air intake temperature sensor which is a part of the MAF. Replaced the MAF with a known good one and viola |
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|