|
200 Series General Forum for the Volvo 240 and 260 cars |
![]() |
|
fan motor rubber mounting lugsViews : 546 Replies : 6Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
New Member
Last Online: Jun 11th, 2024 22:37
Join Date: Aug 2015
Location: PRUDHOE
|
![]()
i know that some of the forum members would have changed their heater motors at some point, im in the process of doing just that the problem that i am having is getting the rubber lugs on the fan casing seated onto the plastic carrier has any one found a solution its driving me nuts
|
![]() |
![]() |
![]() |
#2 |
Member
Last Online: Jun 19th, 2024 15:06
Join Date: Sep 2018
Location: Harrogate
|
![]()
https://www.volvoforums.org.uk/showthread.php?t=328943
If you follow my guide I used a different solution to mount my motor. |
![]() |
![]() |
![]() |
#3 |
New Member
Last Online: Jun 11th, 2024 22:37
Join Date: Aug 2015
Location: PRUDHOE
|
![]()
cheers that looks a better solution. have you had any vibration problems with your fix
|
![]() |
![]() |
![]() |
#4 |
Member
Last Online: Jun 19th, 2024 15:06
Join Date: Sep 2018
Location: Harrogate
|
![]() |
![]() |
![]() |
The Following 2 Users Say Thank You to Big 240 For This Useful Post: |
![]() |
#5 |
MY 240 DRIVES ME!
Last Online: Jun 20th, 2024 07:15
Join Date: Jan 2007
Location: ashford kent
|
![]()
Hi I"ve done this job twice..put the rubber lugs in very hot water and lubed with washing liquid and you"ll get there...Though i have say the alternate solution looks very good.hj
|
![]() |
![]() |
![]() |
#6 |
Premier Member
Last Online: Today 09:23
Join Date: Sep 2017
Location: STANDISH LANCASHIRE
|
![]()
Try and avoid washing up liquid as a lubricant if you can:~
After a little while the stuff will dry out & harden. Visit your local plumbers merchant or similar and get some lubricant that is used for rubber seals on push fit waste/drain pipes. Bob |
![]() |
![]() |
![]() |
#7 |
MY 240 DRIVES ME!
Last Online: Jun 20th, 2024 07:15
Join Date: Jan 2007
Location: ashford kent
|
![]()
or you could clean it off afterwards?
|
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|