|
700/900 Series General Forum for the Volvo 740, 760, 780, 940, 960 & S/V90 cars |
![]() |
|
PAS pump optionsViews : 414 Replies : 6Users Viewing This Thread : |
![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Grumpy Old Git
Last Online: Yesterday 12:28
Join Date: Dec 2004
Location: South Yorkshire
|
![]()
I was doing my usual monthly check on the 940 this morning and I've noticed that there is a bit of a wobble on the PAS pump shaft. Not just the pulley, its the shaft that looks like its moving so I suspect a bearing has failed. It is a bit noisier today too.
What replacement do you suggest? I've seen a TRW recon one, but I was wondering what other options there are? I don't want to fit a "good used" one in case that also fails in the near future. Thanks as always
__________________
S40 2.4i '07 Japanese import '96 850R - https://www.volvoforums.org.uk/showthread.php?t=312484 Ex Danish Embassy '96 940 GLE LPT - https://www.volvoforums.org.uk/showthread.php?t=326071 ![]() |
![]() |
![]() |
The Following User Says Thank You to RollingThunder For This Useful Post: |
![]() |
#2 |
Member
Last Online: Today 09:11
Join Date: May 2007
Location: Chard
|
![]()
Classic Swede has this (I havent used so cant comment on quality etc)
https://www.classicswede.org/shop/po...=6063c4f214d95
__________________
1994 Volvo 940 Estate |
![]() |
![]() |
The Following 3 Users Say Thank You to Paulk For This Useful Post: |
![]() |
#3 |
VOC Member
Last Online: Yesterday 23:05
Join Date: Feb 2008
Location: Gloucester
|
![]()
Remeber to check whether the fluid return spigot goes straight out the back (8251726) or is angled up at 90° (8252306). There is quite a lot of choice on Aiutodoc for new non-OEM pumps but I’m not sure if they are clear on this compatibility detail.
Also, if your new one doesn’t come with a pulley attached you’ll have a whole world of pain transferring the pulley. You will need appropriate pullers and pushers dependent on whether the pump you’re working on has a 3/8” or 10mm thread. There’s some info on this and the correct tools (at a price) on the Skandix website. Good luck! |
![]() |
![]() |
The Following 2 Users Say Thank You to Forrest For This Useful Post: |
![]() |
#4 | |
Master Member
Last Online: Today 00:34
Join Date: Jul 2021
Location: United Banana Republic of Portugal
|
![]() Quote:
https://www.skandix.de/en/spare-part...ng-system/675/
__________________
Proud owner of a 1997 940 2.3 lpt Manual with 501,000km. |
|
![]() |
![]() |
The Following 2 Users Say Thank You to SalvadorP For This Useful Post: |
![]() |
#5 | |
Trader Volvo in my veins
Last Online: Yesterday 22:45
Join Date: Dec 2004
Location: Anglesey
|
![]() Quote:
need to check the hose connection at the back of the pump. |
|
![]() |
![]() |
The Following 3 Users Say Thank You to classicswede For This Useful Post: |
![]() |
#6 |
Grumpy Old Git
Last Online: Yesterday 12:28
Join Date: Dec 2004
Location: South Yorkshire
|
![]()
Thanks everyone, I'll have a look at the pump tomorrow to see which one I need
__________________
S40 2.4i '07 Japanese import '96 850R - https://www.volvoforums.org.uk/showthread.php?t=312484 Ex Danish Embassy '96 940 GLE LPT - https://www.volvoforums.org.uk/showthread.php?t=326071 ![]() |
![]() |
![]() |
The Following User Says Thank You to RollingThunder For This Useful Post: |
![]() |
#7 |
Grumpy Old Git
Last Online: Yesterday 12:28
Join Date: Dec 2004
Location: South Yorkshire
|
![]()
Sent an email to your website Dai, thanks
![]()
__________________
S40 2.4i '07 Japanese import '96 850R - https://www.volvoforums.org.uk/showthread.php?t=312484 Ex Danish Embassy '96 940 GLE LPT - https://www.volvoforums.org.uk/showthread.php?t=326071 ![]() |
![]() |
![]() |
![]() |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|