|
S80 '06-'16 / V70 & XC70 '07-'16 General Forum for the P3-platform S80 and 70-series models |
Information |
|
2008 XC70 rear nearside door replacementViews : 181 Replies : 1Users Viewing This Thread : |
|
Thread Tools | Display Modes |
May 12th, 2024, 18:36 | #1 |
New Member
Last Online: Jun 5th, 2024 10:17
Join Date: Jan 2024
Location: Verwood
|
2008 XC70 rear nearside door replacement
Hi all
Long time lurker, 1st time poster.... Managed to demolish the nearside passenger door on a car park bollard on my beloved 2008 XC70. Could cry. Anyway, best foot foward and all that. Trying to source a replacement used door. Found one on ebay advertised as for 2013-2016 Mark 3. My question is, will it fit my 2008 Mark 3 and will the door cards be swappable as the trim is different on the replacement? Any help gratefully received. Thanks all! Richard |
Jun 4th, 2024, 18:02 | #2 |
New Member
Last Online: Jun 5th, 2024 10:17
Join Date: Jan 2024
Location: Verwood
|
In case it helps others, I took a gamble and the good news is the door fits just fine. Bad news is, some of the electronics are different. Window motor is different but still works (albeit with some issues which might be related to the fact the door was from a flood damaged car - looking for a replacement motor now). The entire window regulator assembly & glass is different - again not a problem as it works - I was just hoping to swap the glass over from the old door as it's not tinted like the new door. Speakers are the same. Door locking mechanism mounts slightly differently but fits just fine with a cable-tie workaround! I only really had to swap the window up/down button from the old door card to the new door card as the connectors were different. Otherwise all good.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|