|
C30 / S40 & V50 '04-'12 / C70 '06-'13 General Forum for the P1-platform C30 / S40 / V50 / C70 models |
Information |
|
V50 vibration under accelerationViews : 3871 Replies : 16Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Oct 14th, 2019, 22:55 | #11 |
Premier Member
Last Online: Dec 19th, 2021 22:22
Join Date: Dec 2008
Location: Horsham
|
Not a lot but if you need to top it up, you're better off just draining it and putting new fresh oil in. Its not a hard job really.
__________________
2005 V50 2.0 SE Sport 1999 S40 1.8 Gdi 1993 460 1.7 LX |
Oct 19th, 2019, 09:12 | #12 |
Junior Member
Last Online: Aug 27th, 2021 20:35
Join Date: Jan 2017
Location: N/A
|
Changed the axle yesterday, no vibration anymore. Problem solved.
Thank you for help. |
Oct 19th, 2019, 17:39 | #13 |
Senior Member
Last Online: Jun 20th, 2024 15:14
Join Date: Apr 2012
Location: Aylsham
|
how diy you know which to do?
How was the task of replacing? thanks in advance.
__________________
2008 V50 D5 SE Lux Geartronic 1998 V40 2.0t (lpt) (Previous) |
Oct 20th, 2019, 18:49 | #14 |
Junior Member
Last Online: Aug 27th, 2021 20:35
Join Date: Jan 2017
Location: N/A
|
I lifted up the car and checked both axles. Passenger side axle's inner cv joint had A LOT of play in it, drivers side didn't.
The job itself isn't hard. The hardest part in my opinion is getting the bolts loose on the bearing bracket around the axle, they were quite stuck and there isn't a lot of room. But it's doable and everything else went quite smoothly for me. The old axle was very worn on mine, I was surprised it didn't vibrate more than it did. Edit: also when sliding the new axle into the gearbox try not to get the spline dirty, it might not go in all the way if you do and the dirt will obviously be bad for the gearbox if it gets in there. Last edited by 3rk5; Oct 20th, 2019 at 18:52. |
Oct 20th, 2019, 19:24 | #15 | |
Junior Member
Last Online: May 20th, 2024 17:29
Join Date: Sep 2016
Location: Dublin
|
Quote:
How did you check the play of the CV joints, I have some vibration, I suspect the right axle is gone, although it looks in perfect condition....have you changed both of them? Where did you get them? Thanks
__________________
2007 V50 1.6D SE in Black - DPF off & Remap |
|
May 25th, 2024, 21:20 | #16 |
New Member
Last Online: Jun 14th, 2024 20:41
Join Date: Oct 2019
Location: Tadley
|
Having this issue, so far I’ve changed the left engine mount, torque mount, both drive shafts and both wish bones. Still having the issue, might change the gearbox mount next.
|
May 25th, 2024, 22:31 | #17 | |
Experienced Member
Last Online: Today 11:03
Join Date: Jun 2007
Location: L/H side
|
Quote:
__________________
My comments are only based on my opinions and vast experience . |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|