|
700/900 Series General Forum for the Volvo 740, 760, 780, 940, 960 & S/V90 cars |
Information |
|
Cruise control retrofit - 940 - speed signal wireViews : 1244 Replies : 12Users Viewing This Thread : |
|
Thread Tools | Display Modes |
May 27th, 2024, 13:56 | #11 |
VOC Member
Last Online: Today 10:30
Join Date: Feb 2008
Location: Gloucester
|
A good starting point is this “sticky” thread that has links to the original Volvo installation instructions.
https://www.volvoforums.org.uk/showt...=131828&page=3 As you will probably be using secondhand parts from a donor vehicle you need to make sure you get all the bits. It would be easiest to have the donor vehicle nearby so you can see how all the parts are installed and connected. A 1997 car should be mostly pre-wired. |
The Following User Says Thank You to Forrest For This Useful Post: |
May 27th, 2024, 14:00 | #12 | |
New Member
Last Online: Yesterday 10:21
Join Date: May 2024
Location: Valmiera
|
Quote:
|
|
May 28th, 2024, 08:50 | #13 |
Premier Member
Last Online: Yesterday 15:01
Join Date: Sep 2014
Location: Bristol
|
There are two different cruise control modules, with different wiring connectors (with different numbers of pins).
You'll need the cruise control module to fit your wiring loom. The only other difference is making sure the bits on the engine fit the type of engine you have. The throttle reel is different between Redblock, 760 6 cylinder and diesel models. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|