|
850 / S70 & V70 '96-'99 / C70 '97-'05 General Forum for the 850 and P80-platform 70-series models |
Information |
|
Walnut Trim & Alloys For T5Views : 1223 Replies : 14Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Dec 5th, 2004, 13:37 | #11 |
Senior Member
Last Online: May 16th, 2020 11:55
Join Date: Dec 2002
Location: Hayling Island
|
RE: Walnut Trim & Alloys For T5
Re the springs and shocks, it's an 'R' remember, all stiffened and lowered.
Dave V70 'R' AWD |
Dec 5th, 2004, 16:12 | #12 |
Guest
Location:
|
RE: Walnut Trim & Alloys For T5
Dave,
Good point, so time for advice again, should i change springs and shocks ?? or leave original ones on. Rodger |
Dec 5th, 2004, 17:28 | #13 |
Premier Member
Last Online: May 24th, 2022 14:21
Join Date: Dec 2001
Location: Wheathampstead
|
RE: Walnut Trim & Alloys For T5
Hi Rodger. Wheels are Volvo "Comet" 17"s. Exhaust - well I'm running the Ferrita downpipe, race cat and back section bought from Kalmar Union (Don). Very happy with it.
Braydon Motors http://www.volvocarparts.co.uk/ Alastair |
Dec 5th, 2004, 21:16 | #14 |
Guest
Location:
|
RE: Walnut Trim & Alloys For T5
Alastair & All.
I want to say thanks for all the help this weekend, i now have some good ideas on what i want to do. I've got loads of phone calls to make tomorrow. Last question, anyone got any tips on Brakes. Which ones are best and which ones aren't Thanks Rodger |
Dec 5th, 2004, 22:30 | #15 |
Guest
Location:
|
RE: Walnut Trim & Alloys For T5
AP's are apparently the best but they do cost over £1,200 for the fronts. Oh, and you need 17" wheels otherwise they won't fit.
Regards Andy |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|