|
400 Series General Forum for the Volvo 440, 460 and 480 cars |
Information |
|
480 Headlamp washers (tee peice)Views : 1160 Replies : 4Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Apr 10th, 2008, 14:25 | #1 |
New Member
Last Online: Sep 9th, 2009 16:09
Join Date: Feb 2008
Location: Milton Keynes
|
480 Headlamp washers (tee peice)
Hi all (again).
The pipe to the headlamp washers tees off to each washer jet through a tee piece which looks to have eiher 2 x one way valves built in, or something like a low pressure stop valve (to stop the syphoning effect emptying the tank, but opens with the pressure of the pump). The tee piece is built with 2 holes in it (for some reason), perhaps to say, allow the water out if the headlamp washer jet was frozen, rather than blowing the pipe off (just a guess). Water runs out of one of these holes all of the time, emptying the tank. Does anyone know what the puropse of this part actually is (or can I replace it with a standard tee piece). The correct one from Volvo is 16 pounds plus vat, so it must do something other than be a tee. Regards, Keith |
Apr 10th, 2008, 21:29 | #2 |
Premier Member
Last Online: Jun 17th, 2024 13:57
Join Date: Dec 2002
Location: Co. Limerick, Ireland
|
I'm a little cofused without seeing the item but I imagine there's a diaphram in that T piece. Maybe a good rinse in hot soapy water might clear any debris that might be preventing proper function? Don't apply pressure or anything sharp as it may do damage.
Hope it works... Can you post a pic?
__________________
Liam... '96 854 TDI SE, '99 V70 2.5D S, '05 C70 2.0T Collection, '05 S80 2.0T SE, '15 V70 D4 SE Lux Nav. |
Aug 20th, 2008, 12:21 | #3 |
Director
Last Online: Yesterday 14:57
Join Date: Nov 2002
Location: Chelmsford
|
Washer
Its worth taking your time to remove it!
I used too much force (and ignorance!) on mine and it snapped in two! Chris |
Aug 20th, 2008, 20:04 | #4 |
New Member
Last Online: Sep 19th, 2015 19:03
Join Date: Mar 2008
Location: birmingham
|
washer t peice
most of the volvo s with headlamp washers use these they`re there to stop the washer fluid syphoning out through the jets after use. inside is a spring which pushes a felt seal against the input hole but opens when the washers are used however it can end up full of gunge and/or the felt seal fails or jams open. the top of the unit above the two outputs can be prised off releasing the spring and seal for cleaning needless to say, take care, the spring wants to escape onto the garage floor to join its mates hidden under 3 tons of crap. the system does need it or your car will cry its eyes out every where you go but try cleaning in warm water before you give up on it. hope this helps
|
Aug 24th, 2008, 20:44 | #5 |
Junior Member
Last Online: Aug 24th, 2008 20:51
Join Date: Nov 2006
Location: Marsascala
|
Hi. I just changed mine after finding a replacement on ebay - Got it for something like £3.99! Now no more empty wiper water bottle.
ROb |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|