Wanted Pair of OEM Horns for 940

RealEstate · Sep 27th, 2008, 22:45

Hi,
I'm looking for a pair (hi & lo freqs) of Volvo/Bosch OEM horns for my 1991 945. I believe they're the same for 940s up to 1995. I believe the Bosch pt# are 0-320-043-147 & 148
See pic below

I also need the cable ends as I've broken one of mine,
Any help appreciated,
Thanks,
Ben

Peter Milnes · Sep 30th, 2008, 03:19

I might be able to help you, I have a pair on the single bracket which was made for that job. Those have seen better days, haven't they.

All the best, Peter.

phillipo · Sep 30th, 2008, 10:29

if not, I have a pair from an 03 c70 if you can make them fit.

Steve Curtis · Sep 30th, 2008, 20:41

Check my post breaking 940 sports edition.

RealEstate · Sep 30th, 2008, 21:13

All,

Thanks for the offers, unfortunately too late. I just bought a pair from Braydon for £22 delivered.

I'm having trouble getting the cylindrical connectors out of the sockets on the horn, both on my rusty old horns and in the 'new' Braydon ones, which came with 6" of loom. The contact pins corrode and will not part. It's dead easy to yank too hard and snap off the pin on the end of each wire. Hopefully a few days soaking in WD-40 will free them.
All the best,
Ben

Sep 27th, 2008, 22:45	#1
RealEstate Master Member Last Online: Nov 4th, 2018 16:06 Join Date: Dec 2003 Location: Berkshire & N Wales View Photos By: RealEstate	Wanted Pair of OEM Horns for 940 Hi, I'm looking for a pair (hi & lo freqs) of Volvo/Bosch OEM horns for my 1991 945. I believe they're the same for 940s up to 1995. I believe the Bosch pt# are 0-320-043-147 & 148 See pic below I also need the cable ends as I've broken one of mine, Any help appreciated, Thanks, Ben

Sep 30th, 2008, 21:13	#5
RealEstate Master Member Last Online: Nov 4th, 2018 16:06 Join Date: Dec 2003 Location: Berkshire & N Wales View Photos By: RealEstate	Horns All, Thanks for the offers, unfortunately too late. I just bought a pair from Braydon for £22 delivered. I'm having trouble getting the cylindrical connectors out of the sockets on the horn, both on my rusty old horns and in the 'new' Braydon ones, which came with 6" of loom. The contact pins corrode and will not part. It's dead easy to yank too hard and snap off the pin on the end of each wire. Hopefully a few days soaking in WD-40 will free them. All the best, Ben

Sep 30th, 2008, 03:19	#2
Peter Milnes Premier Member Last Online: Apr 10th, 2014 00:01 Join Date: Feb 2002 Location: Tonyrefail	I might be able to help you, I have a pair on the single bracket which was made for that job. Those have seen better days, haven't they. All the best, Peter.

Sep 30th, 2008, 10:29	#3
phillipo Junior Member Last Online: Jul 26th, 2011 01:48 Join Date: Jul 2008 Location: bristol	if not, I have a pair from an 03 c70 if you can make them fit.

Sep 30th, 2008, 20:41	#4
Steve Curtis super cruising 240 Last Online: Jul 3rd, 2018 21:35 Join Date: Oct 2004 Location: Swindon	Check my post breaking 940 sports edition.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)