|
400 Series General Forum for the Volvo 440, 460 and 480 cars |
Information |
|
480 turbo lumpViews : 750 Replies : 5Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Feb 18th, 2009, 19:13 | #1 |
Junior Member
Last Online: Nov 29th, 2012 22:18
Join Date: Jul 2008
Location: oxford
|
480 turbo lump
hi guys and girls im buying a volvo 480 T lump on friday for my clio 16valver its been running in a clio allready so all the mods have been done to get it running etc i wanted to know of any mods ect to get the most out of the engine thanks chris
|
Feb 18th, 2009, 20:20 | #2 |
Experienced Member
Last Online: Yesterday 23:50
Join Date: Jun 2007
Location: L/H side
|
the engine is mapped to about 13 psi and 155 bhp but runs at 9 psi and 120 bhp you can unleash some more power by raising the boost to just under the safety cut out at 12 psi .
__________________
My comments are only based on my opinions and vast experience . |
Feb 18th, 2009, 20:31 | #3 |
Junior Member
Last Online: Nov 29th, 2012 22:18
Join Date: Jul 2008
Location: oxford
|
i take it i have to purchase a manual boost controller to achieve this also have you heard about a richmod for the ecu?
|
Feb 18th, 2009, 20:49 | #4 |
Experienced Member
Last Online: Yesterday 23:50
Join Date: Jun 2007
Location: L/H side
|
the ignition ecu controls the boost , i used an electronic boost controler and disconnected the control from the ecu ..
The transaxle wont take much more than 155 bhp for long its already uprated by Volvo from the standard renault one ...
__________________
My comments are only based on my opinions and vast experience . |
Feb 19th, 2009, 17:04 | #5 |
Junior Member
Last Online: Nov 29th, 2012 22:18
Join Date: Jul 2008
Location: oxford
|
does anyone know rich that does the ecu modds?
|
Feb 21st, 2009, 17:26 | #6 | |
Master Member
|
Quote:
__________________
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|