|
850 / S70 & V70 '96-'99 / C70 '97-'05 General Forum for the 850 and P80-platform 70-series models |
Information |
|
SC-xxx AUX INPUT HACKViews : 86005 Replies : 301Users Viewing This Thread : |
|
Thread Tools | Display Modes |
Apr 17th, 2010, 11:26 | #121 |
Premier Member
Last Online: Jan 28th, 2017 13:15
Join Date: Oct 2009
Location: Leuchars, St Andrews
|
ok, I got myself an Sc802 to have a look.
on the inside, it looks the same as the 805 but without the CD unit
__________________
1994 850 TURBO (2008 - 2011) Now Scrapped Sadly Metallic Grey Full Leather |
Apr 17th, 2010, 11:28 | #122 |
Premier Member
Last Online: Jan 28th, 2017 13:15
Join Date: Oct 2009
Location: Leuchars, St Andrews
|
so first way to hack , is remove the cassette, follow Bill's 805 hack on Page 3 of this thread, and solder to the two traingle points on the cassette PCB. they are clearly marked LCH and RCH. You can simply use a case chassis earth for the earth
__________________
1994 850 TURBO (2008 - 2011) Now Scrapped Sadly Metallic Grey Full Leather |
Apr 17th, 2010, 11:35 | #123 |
Premier Member
Last Online: Jan 28th, 2017 13:15
Join Date: Oct 2009
Location: Leuchars, St Andrews
|
however, one thing I found with these units, there is another way.
if you remove the cassette unit, and the ribbon cable, like below, then the unit thinks there is a cassette installed, even when there is no unit fitted. so this avoids having to use a blank cassette to fool the system, but does mean you will have no cassette facility, but lets face it, who needs it? so i have removed mine, and left it out
__________________
1994 850 TURBO (2008 - 2011) Now Scrapped Sadly Metallic Grey Full Leather |
Apr 17th, 2010, 11:38 | #124 |
Premier Member
Last Online: Jan 28th, 2017 13:15
Join Date: Oct 2009
Location: Leuchars, St Andrews
|
but, this now means we need to find another method of connection
so, we use the lower board method again remove the lower panel from the case, and look towards the rear edge for the area marked in yellow, this is where the cassette ribbon connects
__________________
1994 850 TURBO (2008 - 2011) Now Scrapped Sadly Metallic Grey Full Leather |
Apr 17th, 2010, 11:40 | #125 |
Premier Member
Last Online: Jan 28th, 2017 13:15
Join Date: Oct 2009
Location: Leuchars, St Andrews
|
so, we need to find the two pins, and these are the two we need
be carefull when connecting, as the ones to the right have 12V in them for the motor, so do not cross solder or you will short the unit again, use a case earth for your earth, and use 10uf Capacitors as previous
__________________
1994 850 TURBO (2008 - 2011) Now Scrapped Sadly Metallic Grey Full Leather |
Apr 17th, 2010, 12:53 | #126 |
Premier Member
Last Online: Jan 28th, 2017 13:15
Join Date: Oct 2009
Location: Leuchars, St Andrews
|
ok, so here is the 802, being soldered onto the lower side
2 10uf Capacitors, added to the points, then the AUX leads added. notice the Earth added to the main earth
__________________
1994 850 TURBO (2008 - 2011) Now Scrapped Sadly Metallic Grey Full Leather |
The Following User Says Thank You to bobbych For This Useful Post: |
Apr 17th, 2010, 12:55 | #127 |
Premier Member
Last Online: Jan 28th, 2017 13:15
Join Date: Oct 2009
Location: Leuchars, St Andrews
|
now, simply cover the connections in elec tape to stop them shortening on the board, and cover, then replace the cover, feeding the cables out the rear
__________________
1994 850 TURBO (2008 - 2011) Now Scrapped Sadly Metallic Grey Full Leather |
Apr 17th, 2010, 12:57 | #128 |
Premier Member
Last Online: Jan 28th, 2017 13:15
Join Date: Oct 2009
Location: Leuchars, St Andrews
|
then tested, using my home rig I made using a 12V convertor and some speakers [saves going out to the car]
remember, i have removed my whole tape deck unit so inside is emtpy, and it allows me to select TAPE on the front and does not need a blank cassette to fool it my Aux input worked great using this. so that is the SC802 now hacked along with SC800 SC801 SC805
__________________
1994 850 TURBO (2008 - 2011) Now Scrapped Sadly Metallic Grey Full Leather |
The Following User Says Thank You to bobbych For This Useful Post: |
Apr 17th, 2010, 16:23 | #129 |
Premier Member
Last Online: Jan 28th, 2017 13:15
Join Date: Oct 2009
Location: Leuchars, St Andrews
|
I must say, having now fitted this to my 850, the sound quality of the AUX is much clearer then the SC800/801 versions I have hacked, so it seems these newer units have a better Cassette system. Only issue is that it is grey, and the rest of my dash is Black
__________________
1994 850 TURBO (2008 - 2011) Now Scrapped Sadly Metallic Grey Full Leather |
May 8th, 2010, 15:22 | #130 |
Premier Member
Last Online: Jan 28th, 2017 13:15
Join Date: Oct 2009
Location: Leuchars, St Andrews
|
ok, decided this weekend to take this Mod one step further, and add a FRONT connection. THis time, it is a 3.5mm jack
Luckily, the 801 comes with a perfect size hole, ready made SO, if you want to do this, instead of the rear, or indeed, as I have done, along side the rear, then first simply remove the front Look next to the tuning knob, you will see a blank fitted. simply remove the black from the rear and you have a ready made hole.
__________________
1994 850 TURBO (2008 - 2011) Now Scrapped Sadly Metallic Grey Full Leather |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|