Solid, dog-dish flywheel

wakasaki940 · Mar 11th, 2011, 23:34

I whipped my gearbox and bell housing off today just on axle stands on my drive. Perviously intending to just change the clutch, I have decided as I never want to go through that again, to throw out the dual mass flywheel and drop in the solid one. I've already got the 228mm clutch setup ready to go in, now I just need the flywheel, does anyone happen to have one lying around? I would go for the TTV Racing lightened one if I had the money

wakasaki940 · Mar 12th, 2011, 11:06

Will this have the solid flywheel? it's a K reg judging by the picture. Does it matter that it's an automatic?

http://cgi.ebay.co.uk/VOLVO-940-SE-A...2#ht_890wt_907

baggy798 · Mar 12th, 2011, 19:56

Automatics have flex-plates not flywheels.

Isn't there two dogdish flywheels available, one for LH2.4 and one for Motronic?

wakasaki940 · Mar 13th, 2011, 12:04

I'm not sure tbh, I only know about it being in the LH2.4. If anyone has one for sale please PM me, my car is off the road until I get one, it would be a shame to put it all back together with the dual mass as it's such a ball ache on axle stands.

wakasaki940 · Mar 13th, 2011, 12:38

Copied from another thread

The B230ET Motronic flywheel does not have the 58 drilled holes like the LH2.4 one, it just has one pin, which again must be fitted at 9 oclock with the engine on TDC or it should be visible through starter motor hole.

The motronic uses 2 flywheel sensors, one to count the ring teeth and one to get the TDC timing mark.

So I guess I can only use one from an LH2.4

Dr Dokeh · Mar 15th, 2011, 15:36

Hi mate, I'm 99% sure I've still got one that I bought for my old 940 and never used.

What's your email? I'll confirm later on tonight, or you can email me drdoke AT gotadsl.co.uk

wakasaki940 · Mar 15th, 2011, 22:07

Nice one mate, email is wakasaki_@hotmail.co.uk

wakasaki940 · Mar 22nd, 2011, 14:57

Anyone know if I need shorter bolts and what the volvo part number is for them? thanks

Mar 11th, 2011, 23:34	#1
wakasaki940 2005 V70 D5 estate Last Online: Oct 14th, 2018 12:45 Join Date: Oct 2010 Location: Glossop	Solid, dog-dish flywheel I whipped my gearbox and bell housing off today just on axle stands on my drive. Perviously intending to just change the clutch, I have decided as I never want to go through that again, to throw out the dual mass flywheel and drop in the solid one. I've already got the 228mm clutch setup ready to go in, now I just need the flywheel, does anyone happen to have one lying around? I would go for the TTV Racing lightened one if I had the money

Mar 12th, 2011, 11:06	#2
wakasaki940 2005 V70 D5 estate Last Online: Oct 14th, 2018 12:45 Join Date: Oct 2010 Location: Glossop	Will this have the solid flywheel? it's a K reg judging by the picture. Does it matter that it's an automatic? http://cgi.ebay.co.uk/VOLVO-940-SE-A...2#ht_890wt_907 Last edited by wakasaki940; Mar 12th, 2011 at 11:43.

Mar 15th, 2011, 15:36	#6
Dr Dokeh Junior Member Last Online: May 23rd, 2017 12:51 Join Date: Mar 2006 Location: Nr. Bridgend, South Wales	Hi mate, I'm 99% sure I've still got one that I bought for my old 940 and never used. What's your email? I'll confirm later on tonight, or you can email me drdoke AT gotadsl.co.uk __________________ 1998 Volvo S90

Mar 12th, 2011, 19:56	#3
baggy798 🤍💙💗 Last Online: Yesterday 21:07 Join Date: Mar 2006 Location: Lichfield	Automatics have flex-plates not flywheels. Isn't there two dogdish flywheels available, one for LH2.4 and one for Motronic?

Mar 13th, 2011, 12:04	#4
wakasaki940 2005 V70 D5 estate Last Online: Oct 14th, 2018 12:45 Join Date: Oct 2010 Location: Glossop	I'm not sure tbh, I only know about it being in the LH2.4. If anyone has one for sale please PM me, my car is off the road until I get one, it would be a shame to put it all back together with the dual mass as it's such a ball ache on axle stands.

Mar 13th, 2011, 12:38	#5
wakasaki940 2005 V70 D5 estate Last Online: Oct 14th, 2018 12:45 Join Date: Oct 2010 Location: Glossop	Copied from another thread The B230ET Motronic flywheel does not have the 58 drilled holes like the LH2.4 one, it just has one pin, which again must be fitted at 9 oclock with the engine on TDC or it should be visible through starter motor hole. The motronic uses 2 flywheel sensors, one to count the ring teeth and one to get the TDC timing mark. So I guess I can only use one from an LH2.4

Mar 15th, 2011, 22:07	#7
wakasaki940 2005 V70 D5 estate Last Online: Oct 14th, 2018 12:45 Join Date: Oct 2010 Location: Glossop	Nice one mate, email is wakasaki_@hotmail.co.uk

Mar 22nd, 2011, 14:57	#8
wakasaki940 2005 V70 D5 estate Last Online: Oct 14th, 2018 12:45 Join Date: Oct 2010 Location: Glossop	Anyone know if I need shorter bolts and what the volvo part number is for them? thanks

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)