Volvo X (Pro-Touring 1967 Amazon)

[lukeball]

Originally Posted by Iamtheonlyreal1

No problem.. The components will not be available seperately, but you can upgrade at anytime if you purchase a kit and wish to change something later.. As far as the brake components and other items, they will not interchange with any Volvo by themselves. All those components rely on my crossmember and other custom made items to allow the aftermarket components to work on your factory Volvo.

While we are on this topic, What will happen to your old front brake setup on your Amazon? It looked like a nice setup and worked with the stock crossmember.

[Iamtheonlyreal1]

Originally Posted by lukeball

While we are on this topic, What will happen to your old front brake setup on your Amazon? It looked like a nice setup and worked with the stock crossmember.

The front brake (Red Caliper) set up is what is offered in the base kit, and it is not compatible with the original crossmember. Those are general motors Calipers and Ford rotors on a ford spindle.. The ford spindle works with the tubular control arms, that are attached to the customer crossmember..

[Iamtheonlyreal1]

Here are some pictures of the 14 inch Wilwood Drilled/Slotted Rotor and 6 Piston Caliper kit.. The other 11 inch Drilled/Slotted Rotor is an upgrade also, which will be considerably less. The kit comes standard with the 11 Smooth Rotors.

I will have some updated pictures of the complete Front end kit later this weekd.

[Iamtheonlyreal1]

[Iamtheonlyreal1]

Here are some pictures of the Crossmember/Suspension components.. I will Post some more pictures when it if fully assembled.

This is a DIRECT BOLT IN KIT....